Ok guys, I finally got around to replacing my carpet and I decided to do a little write-up on removing the complete center console. It is pretty easy and requires only a 7mm and 8mm driver, and a plastic wedge if you have fat fingers . Click the first pic in the gallery and just keep hitting "next" for descriptions. Hope you like it

Center Console Removal

 

Nice write up! Thanks for sharing with us!

 

Good job! Thanks for going through the trouble to document this.

 

Great info... thanks, I was just in the middle of figuring this out. I'm going to route my wiring for my amps through there. Man I love this site!

 

Good stuff man, great right up.

I would Dynamat or use something similar the whole are if I went to that much trouble.

-Will

 

thanks man...im sure this will come in handy...nicely done...y did u need to replace the carpet anyway?

 

A while back a battery spilled some acid out onto the carpet and F'ed it up and I couldn't stand to leave it like that. Here's the link to my other gallery with pics of that....they're at the bottom.
https://www.f150online.com/galleries...w.cfm?num=8060

 

Thanks for the write up! I plan to take off some of the center consol to get painted to match the exterior. I would of figured it out, but you probably saved me quite a bit of time and frustration with the pictures and details. Here's one on me...

 

I got everything out and hooked the shifter back up but it wont go in gear. what the hell did I do wrong?