billet handles
Thread Starter
|
Senior Member
Joined: Apr 2004
Posts: 122
Likes: 0
billet handles
I got my new billet handles for lumbar and seat recliners. Has anybody removed the stock one? Please help! I was told they should just pull off but i can't seem to get them to budge.
Senior Member
Joined: Apr 2005
Posts: 132
Likes: 0
From: Lincoln, NE
PaintMD,
Did the UPR handles work for you? I'm thinking of ordering a set from UPR, but I'm not sure if they will work on our trucks ('04-05)...the web page I'm looking at has them for the older model F150.
Paul
Did the UPR handles work for you? I'm thinking of ordering a set from UPR, but I'm not sure if they will work on our trucks ('04-05)...the web page I'm looking at has them for the older model F150.
Paul
Senior Member
Joined: Apr 2005
Posts: 132
Likes: 0
From: Lincoln, NE
Thump,
The link is as follows:
http://www.uprproducts.com/shopping/shopexd.asp?id=686
I sent PaintMD an email...he said that the wheel and handles do work, but they were designed for the heritage model (he said the handle looked small). I may order the wheel now and wait to see what UPR does for a newer billet handle...not sure, but I'll let you know.
Paul
The link is as follows:
http://www.uprproducts.com/shopping/shopexd.asp?id=686
I sent PaintMD an email...he said that the wheel and handles do work, but they were designed for the heritage model (he said the handle looked small). I may order the wheel now and wait to see what UPR does for a newer billet handle...not sure, but I'll let you know.
Paul
