Cheap Sub Boxes
 

I know Supercrewsound.com was selling these boxes for like $150. I found these boxes on Ebay and they want $90 but I don't know many subs that have a 5" mounting depth. Im starting to think that someone made these boxes realizing that they couldn't mount any subs in them. Anyone know of a sub that only has a 5" mounting depth because if so this would be a good deal.

http://cgi.ebay.com/ws/eBayISAPI.dll...761476868&rd=1

Just thought I'd let everyone know! :thumbsup:

I would get this sub and sub enclosure if I didn't already have the Audiophile setup...

MTX 12" w/ enclosure

rockford punch 10" stage 1's will fit perfect. Just do it, they fit and they will rattle your fillings loose. at only 69.99 a piece at bestbuy. it's what i got - enjoy :)

Thats the box I have and my Kicker CVRs were too deep to mount in it, but being its made of 3/4 particle board (or something like that) all I did was take my grinder and grind out about 1/2 of an inch where the magnet was hitting (in turn making the box 1/2 deeper) and the speakers then fit fine.

Depending on the wattage that you are looking to push, you can go with an Audiobahn Q series sub. I have a fosgate 800 watt amp bridged to a single 10 and it has handled it so far. The speaker is rated at 1000 watts with only a 4.5" mount depth.

Pioneer makes a shallow mount 12" sub. They are like 1200 watts a piece and only about 150 bucks. They sound great. I 've installed quite a few in these new trucks. I think the mounting depth is around 4" if i remember correctly.

Too bad this box is only for 10"s

These are the NEW! JL's subs that I plan on getting sometime this Spring. The mounting depth is only 4.34"

These are the best subs on the planet!!

http://www.jlaudio.com/press/W1v205.html

http://www.jlaudio.com/press/images/10W1v2_FLT.jpg

I wish I could get the Pioneers if anything but Im going with the L7s. I mean 8s that are going to be pushing 900w RMS together, sounds pretty good for 8s to me! :thumbsup:

The subs, box, amp, wiring is going to cost me about $800.

I bought a box for a 10 inch sub on ebay and used a jigsaw to cut a hole for my 12 inch Pioneer flat sub. took 5 min.