2004 - 2008 F-150
Sponsored by:
Sponsored by: Real Truck

Shed Some Light on Theft.

Thread Tools
 
Search this Thread
 
Old Jan 24, 2005 | 12:00 PM
  #1  
fx4scab's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2004
Posts: 450
Likes: 0
From: Tulsa, Oklahoma
Shed Some Light on Theft.

I was interested in adding some lights to the front of my truck after I install a brush guard and was wondering if there is any way to prevent thieves from just tearing these things right off. Is there some kind of locking mechanism that you can install or comes with these lights? My truck sits outside sometimes at night and I am concerned that adding things like this will attract more attention to thieves. Anyone know anything about this?
 
Reply
Old Jan 24, 2005 | 12:19 PM
  #2  
Tun2One's Avatar
Senior Member
Joined: Nov 2004
Posts: 434
Likes: 0
From: Tulsa
I would drill a hole thru the bolt, below the nut, and wrap wire thru the hole and around the bolt and then wrap with tape. It would take some time for them to figure this out, especially at night. Or, if you are going to leave the lights on forever, you could smash the threads below the nut, in which case you would have to cut the bolt off to get the lights off. Another thought would be to use a locking mechanism similar to a wheel lock, but this would be hard to find, and a vice grip could be used to loosen.
 
Reply
Old Jan 24, 2005 | 12:28 PM
  #3  
easterisland's Avatar
Senior Member
Joined: Jul 2001
Posts: 5,592
Likes: 0
From: Nashville
Originally posted by Tun2One
I would drill a hole thru the bolt, below the nut, and wrap wire thru the hole and around the bolt and then wrap with tape. It would take some time for them to figure this out, especially at night. Or, if you are going to leave the lights on forever, you could smash the threads below the nut, in which case you would have to cut the bolt off to get the lights off. Another thought would be to use a locking mechanism similar to a wheel lock, but this would be hard to find, and a vice grip could be used to loosen.
I have locks similar to wheel locks on my piaa lights and westin bull bar. I think I purchased the locks from piaa, but it would be too simplae just to remove the entire bull bar...
 
Reply
Old Jan 24, 2005 | 01:18 PM
  #4  
EddyG88's Avatar
Senior Member
Joined: Feb 2004
Posts: 1,150
Likes: 0
From: Washington DC
I think someone would have to have some serious ***** to come steal your lights, it would also have to be predetermined since they would see a wrench or socket set to do it. If you are that worried then I would just mash the last couple threads on the bolt, but I dont think anyone would rip your lights.
 
Reply
Old Jan 24, 2005 | 03:05 PM
  #5  
inbred's Avatar
Senior Member
Joined: Mar 2004
Posts: 964
Likes: 0
From: Lancaster, PA
a good theif will use a cordless dremmel with a cutting wheel these days. Have heard about them being used a number of times. Noisy, but very quick and unpreventable.

If someone wants to steal something you have, they're going to take it, regardless of what measures you take to prevent it. Don't make it easy, but if you make it too hard to steal, they will just do more damage to your truck when they do take it.
 
Reply
Old Jan 24, 2005 | 03:08 PM
  #6  
fx4scab's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2004
Posts: 450
Likes: 0
From: Tulsa, Oklahoma
Thanks guys! They might or might not try to steal something like this because of the time it might take to get them off, but the ***** of the average thief seem to be bigger here than anywhere else. How do I know this? Well, litterally I would have know idea... , but we've had numerous car thefts and break-ins in the past. We don't live in a bad neighborhood or anything...it's just that the crime rate around here for auto related incidents is pretty high. You can't be too cautious. I had a tool box jacked right out of my bed (which I forgot to take out one night this summer--my fault). It was sitting right in the driveway.
 
Reply
Old Jan 24, 2005 | 03:15 PM
  #7  
Truck of Doom's Avatar
Senior Member
Joined: Feb 2003
Posts: 472
Likes: 0
From: South Pasadena, California
Originally posted by fx4scab
Thanks guys! They might or might not try to steal something like this because of the time it might take to get them off, but the ***** of the average thief seem to be bigger here than anywhere else. How do I know this? Well, litterally I would have know idea... , but we've had numerous car thefts and break-ins in the past. We don't live in a bad neighborhood or anything...it's just that the crime rate around here for auto related incidents is pretty high. You can't be too cautious. I had a tool box jacked right out of my bed (which I forgot to take out one night this summer--my fault). It was sitting right in the driveway.
Reading about things like this makes me wish I had a license to kill. Jeez, do some people suck. *sigh*
 
Reply

Trending Topics

Old Jan 24, 2005 | 03:22 PM
  #8  
fx4scab's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2004
Posts: 450
Likes: 0
From: Tulsa, Oklahoma
I couldn't imagine someone out there making all that racket with a dremmel on a silent night... ............"wait", yes I could!
We've got the "Make My Day" law here though. If someone steps foot on your property with intent or forced entry, you can put a bullet in em.

Inbred's probably right though. If a thief wants something, they're going to take it.
 
Reply
Old Jan 24, 2005 | 03:24 PM
  #9  
ZMANF150's Avatar
Senior Member
Joined: Aug 2004
Posts: 182
Likes: 0
From: Northern AZ
Welder works pretty good. Just put a few tack on the head. Still not 100% but cheap and works as good as locks.

zman
 
Reply
Old Jan 24, 2005 | 03:54 PM
  #10  
fx4scab's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2004
Posts: 450
Likes: 0
From: Tulsa, Oklahoma
........
 

Last edited by fx4scab; Jan 25, 2005 at 01:14 AM.
Reply
Old Jan 24, 2005 | 03:58 PM
  #11  
fx4scab's Avatar
Thread Starter
|
Senior Member
Joined: Jul 2004
Posts: 450
Likes: 0
From: Tulsa, Oklahoma
That's an excellent idea ZMAN. I've got a friend that teaches a welding class and he'll probably help me tack a few spots after I mount them...All good ideas so far. Thanks guys.
 
Reply
Old Jan 24, 2005 | 06:54 PM
  #12  
Serge's Avatar
Senior Member
Joined: Sep 2004
Posts: 135
Likes: 0
From: Winnipeg, Manitoba
geeze.....its no wonder gun control is hotly debated in the US.
 
Reply
Old Jan 24, 2005 | 10:13 PM
  #13  
dean1614's Avatar
Senior Member
Joined: Jan 2005
Posts: 164
Likes: 0
From: katrina's waste land
theives? I know a few guys around here that could steal the yeast out of a biscut without breaking the crust.
bolt and weld it down to prevent theft.
 
Reply
Old Jan 25, 2005 | 08:05 AM
  #14  
WildmanNP's Avatar
Senior Member
Joined: Oct 2004
Posts: 381
Likes: 0
From: New Mexico
After you weld them on,they can take the truck with the lights on it.I watched one time on tv 3 guys with hand tools take apart a suv in less 30 min.I have trouble getting to the bolts and nuts with all the time in the world to do it.If they want it,they will take it.Even with the new systems to keep to keep your vel safe they still get them some how.
 
Reply
Old Jan 25, 2005 | 10:31 AM
  #15  
ZMANF150's Avatar
Senior Member
Joined: Aug 2004
Posts: 182
Likes: 0
From: Northern AZ
Nothing can't be stolen, but the little things can deter some of the dumber theifs. There are many out there that have there winches stolen, and they found welding the bolt heads to be the best deterant, unfortuneatly one guy came out to find that the theif used a Oxy/Acetelyne torch on his front end to get the winch off.

Best way to not get robbed is to not own anything.
 
Reply



All times are GMT -4. The time now is 03:35 AM.