Anyone who has done it, or has a shop manual, Can you post the exact instructions for pulling out the gauge cluster?
2004 STX
I finally found someone that would burn the mileage onto my new FX4 panel.
Chris

 

Chris PM me your email and I'll send it to you

 

Unfortunately, PM is disabled on f150online.com because of past abuses by some members. Thus, I would encourage you to contact him via his email link within his profile. Sorry for the inconvenience.

-RP-

 

Oh...
Your email is disabled. If you want it email me from my profile

 

Thanks again Klassic, Very helpful doc.
To anyone that wants to get a good look under their dash,

1. Remove the kick panel, 2 8mm screws, then unsnap.
2. Lower the tilt wheel.
3. Remove the two 8mm screws holding the dash.
4. The dash panel lifts up, and towords you. Tight clips, but pretty easy. Be careful working it up off of the steering column.
5. Set the two pieces somewhere clean and safe.

IP comes out in moments.
Chris

 

Klassic - Could I please get a copy of that document?

dlewis1340@yahoo.com

Thank You,

Dave