brake dust
Senior Member
Joined: Nov 2004
Posts: 165
Likes: 0
From: Albuquerque, NM
Porterfield.com
Front pads - AP1011 R4-S - $79.00 (when you tell them you got their info from this forum)
Rear pads available too. (I just did the fronts). Call them, they are very helpful.
Most importantly....I haven't had any dust since installed.
Front pads - AP1011 R4-S - $79.00 (when you tell them you got their info from this forum)
Rear pads available too. (I just did the fronts). Call them, they are very helpful.
Most importantly....I haven't had any dust since installed.
Senior Member
Joined: Aug 2004
Posts: 487
Likes: 0
From: Washington State
Originally posted by dzervit
You got some part numbers for the rest of us? Didn't come across any searching...
You got some part numbers for the rest of us? Didn't come across any searching...
big D, search this:the guy:
Jerry Blackwell ( Jerry@BRVRaceSupply.com )
BRVRaceSupply.com
http://stores.ebay.com/BRV-Race-Supply
602.284.9913
yes correct part # is AP 1011 R4-S
Senior Member
Joined: Apr 2004
Posts: 4,424
Likes: 0
From: Motor City
Supposed to be better. The lightning guys rave about them. Only bad things I've heard are on the bimmer forums about them tearing up the rotors, but I suspect it's the shmucks running the full-bore racing compound pads on their stock rotors. D'oh!
The warmer they get, the harder they stop. Very difficult to achieve fade with these pads, or so I have heard.
The warmer they get, the harder they stop. Very difficult to achieve fade with these pads, or so I have heard.
