Fuel pump wires
#2
#6
Ok, answered my own question thanks to some one who posted a wiring diagram (THANK YOU). The P/BK wire to the fuel pump is the power source coming from the inertia switch. What I decided to do since the truck bed was rusted in several areas was to cut a access opening approx. 8"x 6" directly above the fuel module. With this performed I was able to re-attach the P/BK wire where it had broken close to the plastic module housing using a Solder seal shrink butt connector. Problem all solved, will be placing a caulked sheet metal patch panel with self taping screws over the access opening that I made!