1997 - 2003 F-150

Where is Vin Number Stamped into Frame of 2003 Ford F150 Crewcab

Thread Tools
 
Search this Thread
 
Old Jan 11, 2019 | 05:05 AM
  #1  
Matt Freeman's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2019
Posts: 3
Likes: 0
Where is Vin Number Stamped into Frame of 2003 Ford F150 Crewcab

Hi there

I need some help with finding the Vin Numbers that are stamped in the Chassis / Frame of a 2003 Ford F150 Crewcab - I have the Vins of the Truck in Usual Places ie Dash under windshield, Drivers Door B Pillar Sticker, even got a compliance Plate on Firewall - and the Vin of the Truck on the Centre Console - its a 2003 100 Anniversary Harley Davidson edition - but getting truck inspected today and the Inspection Service required to see the Vin # that is stamped into the Chassis / Frame - I couldnt find it as Truck is 15 Years old and had Underseal and Dirt build up - can any one help me where they are stamped or if in Fact Ford Didnt stamp the Vin Number into the Chassis/Frame at all in that year ???

Any Help greatly appreciated

Thanks Matt
 
Reply
Old Jan 11, 2019 | 10:27 AM
  #2  
glc's Avatar
glc
Senior Member
15 Year Member
Veteran: Navy
Veteran: Reserves
Joined: Dec 2006
Posts: 43,542
Likes: 819
From: Joplin MO
The inspection service should know where it is.
 
Reply
Old Jan 11, 2019 | 12:44 PM
  #3  
projectSHO89's Avatar
Senior Member
20 Year Member
Joined: Oct 2002
Posts: 7,295
Likes: 125
From: St. Louis (Out in the woods)
What kind of "Inspection Service" looks for the VIN stamped on the frame?
 
Reply
Old Jan 11, 2019 | 03:43 PM
  #4  
Matt Freeman's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2019
Posts: 3
Likes: 0
Thanks for Reply - sorry but it didnt help me much sorry - I am in Australia the truck was imported in 2003 and converted to Right Hand Drive - they were very limited numbers of them sold and they werent sold by Ford Dealers - the Company who imported them Converted them and sold them - so Ford has no knowledge of the Trucks Vin Location on the Chassis so cant call them here -

Ford sold Ford Trucks here from 2000 to 2006 but there were all F250 & F350s made in Brazil and Right Hand Drive and they have the Vin Stamped on the Right Hand Side of the Chassis Rail Towards the Bed of the Truck on the lower edge - just need some USA Ford F150 Knowledge - if Ford never stamped Vin on the chassis thats Fine - but if they did where did they stamp it and I can go to that area of truck with a wire brush and some gas and clean the area and find it
 
Reply
Old Jan 11, 2019 | 03:56 PM
  #5  
Matt Freeman's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2019
Posts: 3
Likes: 0
Thanks for Reply - sorry but it didnt help me much sorry - I am in Australia the truck was imported in 2003 and converted to Right Hand Drive - they were very limited numbers of them sold and they werent sold by Ford Dealers - the Company who imported them Converted them and sold them - so Ford has no knowledge of the Trucks Vin Location on the Chassis so cant call them here -

Ford sold Ford Trucks here from 2000 to 2006 but there were all F250 & F350s made in Brazil and Right Hand Drive and they have the Vin Stamped on the Right Hand Side of the Chassis Rail Towards the Bed of the Truck on the lower edge - just need some USA Ford F150 Knowledge - if Ford never stamped Vin on the chassis thats Fine - but if they did where did they stamp it and I can go to that area of truck with a wire brush and some gas and clean the area and find it
 
Reply
Old May 14, 2020 | 04:49 AM
  #6  
AzzzzzA's Avatar
Junior Member
5 Year Member
Joined: May 2020
Posts: 4
Likes: 0
Hey Matt, did you end up finding your VIN on the rail? I'm in the same situation (in Melbourne) with a 2000 F-150 that I need to get re-regoed.

Cheers
Aaron
 

Last edited by AzzzzzA; May 14, 2020 at 05:01 AM.
Reply
Old May 16, 2020 | 04:10 PM
  #7  
stoffer's Avatar
Senior Member
Truck of the Month
20 Year Member
Veteran: Army
Community Favorite
Joined: Apr 2004
Posts: 13,679
Likes: 84
From: missing Texas...
Originally Posted by AzzzzzA
Hey Matt, did you end up finding your VIN on the rail? I'm in the same situation (in Melbourne) with a 2000 F-150 that I need to get re-regoed.

Cheers
Aaron
not from the factory they didn’t
 
Reply




All times are GMT -4. The time now is 07:16 AM.