1997 - 2003 F-150

Clipped the Light Pole

Thread Tools
 
Search this Thread
 
Old Nov 11, 2014 | 02:30 PM
  #1  
SWITZERSLAND's Avatar
Thread Starter
|
Member
Joined: Apr 2004
Posts: 59
Likes: 0
From: CO
Clipped the Light Pole

So here it is, Commuting to work headed down the on ramp merging on the interstate and accelerating then./.... red tail lights every where. Swerved right clipped the light pole base on drivers front tire where the rim/wheel meets the tire. Rim is trashed. put on spare drives straight, and now I hear the Rub Rub Rub Rub. Took it to Gemini Goodyear for new tire as I was due. They inspected breaks, alignment New rim purchased new tires all around. They said no damage was noticed. Rub rub rub can still be herd however when I apply the break that sound is gone. Any ideas?

Winter's here.

99 Lariat 4WD 5.4
 
Reply
Old Nov 11, 2014 | 04:06 PM
  #2  
xAUBxPJCx's Avatar
Member
Joined: Dec 2011
Posts: 86
Likes: 0
From: Atlanta
Bent rotor possibly or a shot bearing? Does the truck shudder under braking? I am assuming there is nothing out of the ordinary looking that could be rubbing on the tire?
 
Reply
Old Nov 11, 2014 | 05:55 PM
  #3  
SWITZERSLAND's Avatar
Thread Starter
|
Member
Joined: Apr 2004
Posts: 59
Likes: 0
From: CO
no shudder at low or high speed, sound does no amplify nor change pitch around corners. Rotor brushing the caliper ??
 
Reply
Old Dec 1, 2014 | 04:58 PM
  #4  
SWITZERSLAND's Avatar
Thread Starter
|
Member
Joined: Apr 2004
Posts: 59
Likes: 0
From: CO
Bent rotor was the offender.
 
Reply




All times are GMT -4. The time now is 05:18 PM.