P0125 code and ABS Sensor light - ok to drive?
Thread Starter
|
Member
Joined: Mar 2009
Posts: 43
Likes: 0
From: Navarre, FL
P0125 code and ABS Sensor light - ok to drive?
May be 2 dumb quesitons in 1 but...
P0125 - got code, cleared, returned ~2wks laters. Heater works; temp gauge normal.
ABS - I have the 4WABS system. Scanned at Oreilly Auto Parts - right front sensor failure. Brakes operate normally
Can I drive the truck w/o doing damage for a ~200miles over the course of a few days? Circumstances may delay attending to the situation immediately..
Thanks...
P0125 - got code, cleared, returned ~2wks laters. Heater works; temp gauge normal.
ABS - I have the 4WABS system. Scanned at Oreilly Auto Parts - right front sensor failure. Brakes operate normally
Can I drive the truck w/o doing damage for a ~200miles over the course of a few days? Circumstances may delay attending to the situation immediately..
Thanks...
Last edited by tw_ford; Dec 20, 2012 at 09:05 AM.
Senior Member
Joined: Oct 2002
Posts: 7,295
Likes: 125
From: St. Louis (Out in the woods)
You need a new thermostat for the first issue. It's just an emissions and a somewhat small fuel economy issue in the meantime.
If the ABS light is on, it just means that the ant-lock assist system is offline. You still have normal hydraulic brakes, just no ABS assist.
If the ABS light is on, it just means that the ant-lock assist system is offline. You still have normal hydraulic brakes, just no ABS assist.