My 01 Screw (Pics)
My 01 Screw (Pics)
Just installed some projector fogs. Thought I'd post up some pics. Its an 01 2wd Lariat with 4x4 valance, gotts, edge evo, and white led interior. Crappy cell pics right now though.
35w 6k in lightning heads, 55w 6k in Hella 500 FFs, 55w 6k in ebay projector fogs. Bumpers off center from a bent bracket.


SIDO Dynomax Bullet to 3.5x12 tips.

Some were asking about my interior. Its painted red for a kind of FSU theme. It's a little ricey but I like it lol. Never got around to painting the cig cover yet. Painted with krylon fusion, no sanding or priming.



Future Mods:
-Leveling Coil Spacer
-Bedlined Rear Bumper
-Plasti-Dipped Wheels
-A/T / Rims
-Im gunna put some lighting in the toolbox with the leftover fog bulbs dome lights etc.
35w 6k in lightning heads, 55w 6k in Hella 500 FFs, 55w 6k in ebay projector fogs. Bumpers off center from a bent bracket.


SIDO Dynomax Bullet to 3.5x12 tips.

Some were asking about my interior. Its painted red for a kind of FSU theme. It's a little ricey but I like it lol. Never got around to painting the cig cover yet. Painted with krylon fusion, no sanding or priming.



Future Mods:
-Leveling Coil Spacer
-Bedlined Rear Bumper
-Plasti-Dipped Wheels
-A/T / Rims
-Im gunna put some lighting in the toolbox with the leftover fog bulbs dome lights etc.
Thanks, all i did was pull it out all the way to lock. Then theres two spring clips on the top if you get down and look like into the dash, theres to clips on each side. And i just push those down one side at a time pulling.
there are two tabs to push in, look or feel up behind the cupholder when its all the way out, and on the rails there are two plastic tabs that have to be pushed in to get it to slide off the tracks
Was it pretty easy paint? How many coats did you put on?
I want to paint my dash and everything blue and gold in the truck
To match the Brewers. JK just want a nice grey instead of light and dark brown.
I want to paint my dash and everything blue and gold in the truck
To match the Brewers. JK just want a nice grey instead of light and dark brown.
Trending Topics
thanks! lltoolj, im digging your whole truck i bet my sisters civic could drive under that monster. LOL blue and gold, I wish I did a neutral color like black or gray. Yea it was easy just clean it really good and take your time. I put down 3 thick coats.
Thanks. I have but I'd rather have the peace of mind with more height like curbs uneven roads etc. lol I dont go trailing or offroading but the roads get pretty nasty alot of bumper scraping going on. Plus I go fishing alot sometimes the ramps are dirt.
how soon until it starts flaking off???
that painted cup holder and lack of paitned vents looks totally un cool (IMHO) but I'm glad you like it
Thanks for the opinion. I didnt care much for prep except cleaning it real good cuz i figured it'd flake eventually anyways the only reason for painting was cuz the original paint flaked so I wasn't trying to be professional. Im not even finished though I still need to paint a few more pieces like the cig cover.







