Originally Posted by Halverso_99
(Post 4463238)
I don't think they will work on yours because screw and expy are different. But i would rather have screw or expy because you can swap mirrors with expy all the way up to 2010 i believe.
|
Originally Posted by Klitch
(Post 4463090)
with the ones Rus have, and even mine, there shouldn't be any trimming to do
http://cgi.ebay.com/ebaymotors/97-03...item255aecd3a9 Theres what Rus has (somewhat, I may have linked to a different option package mirror) on my CIPA mirrors, I had to trim the plastic that surrounds the stud, that protrudes through the door skin. |
Originally Posted by Lightning Expo
(Post 4463401)
Please elaborate. Lol. They don't have to telescope I just need power adjustment.
|
So in other words if I want power tow mirrors they don't make them. Fantastic haha. Can I use the ones posted above and just have them manuel?
|
holy crap
K holy crap, the ones on ebay are fully power EXCEPT for telescoping... doesnt take much to get out and pull them out.... no big deal, everything else is power! here is the link http://cgi.ebay.ca/97-03-FORD-F150-F...ht_1002wt_1139
|
Those have already been posted. The whole point is everything on my truck is power so why would I want to go back to non power? I'm not worried about the telescoping.
Sorry to derail the thread. |
The only power the tow mirrors don't have is telescoping and folding. The tilt, Signals, and heat are all available for tow mirrors. (At least from what I've seen on ebay looking for FULLY *Extend/Fold included* power mirrors.)
Power Adjustable with Signals and Heat. 03-05 SuperDuty - Ebay |
best looking mirrors
04 Duramax mirrors are my favorite they look clean as can be
|
Originally Posted by MRyan
(Post 4473544)
04 Duramax mirrors are my favorite they look clean as can be
|
Originally Posted by Ace_boy2099
(Post 4463037)
Hate to bug you with the same questions again, first time around didn't really provide any answers. How do the mirrors look after your modifying them?? Are there gaps or do they sit flush like they should?? How hard was it to modify them, was it just trimming the part that touches the door or did you have to rearrange the wiring pins or something?? Thanks for any info you can provide.
https://www.f150online.com/forums/me...0110205-15.jpg https://www.f150online.com/forums/me...20110205-9.jpg https://www.f150online.com/forums/me...0110205-10.jpg https://www.f150online.com/forums/me...0110205-14.jpg I proboly would have eventually bought some like what Russ has, But I bought a truck that has them stock, so theres no need. |
its really a shame that they rape you to ship to Canada... when just across the border its about 80 dollars cheaper, im going to end up paying about 250 bucks done then maybe throw them on the truck when im across in the states ill ship them over there
|
All times are GMT -4. The time now is 04:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands