Fabtech 7.5" long travel
#48
#49
I will, I feel bad as-is for that. Before I left I carried all the crap I needed into the dining room(including your LEDs and a wad of cash that I needed) and just so happen to forget both . God help me, if my head wasn't attached to my shoulders i'd probably loose that too. I will make it up!
#50
Well, I loved everything until I saw the charger...
You know i'm kidding haha. Someday when I get to do mine, I'm going the positive displacment route...better torque from the get go with still alot of power gain. Should still be a nice set up though bud! Can't wait to see everything!
You know i'm kidding haha. Someday when I get to do mine, I'm going the positive displacment route...better torque from the get go with still alot of power gain. Should still be a nice set up though bud! Can't wait to see everything!
I have been forgetting his LEDs though. This makes the second time I have forgotten if not third . I am going to send him the whole dang pack of them. I am sure Jake can find a use for 100 pre wired LEDs
#51
#57
Well as many of you know already, I bought the whole long travel set-up from fabtech. It took me forever to get it put on, and there were a few complications. BUT I managed to get it done!! So now I have pics! But they are very poor quality due to them being cell phone pictures. I will have some new, better ones for you guys asap though. This first one is kinda to be used as a reference 9" of lift in the front.
These are the long travel so I would guess its sitting at right about 11-12" of lift or so here.
This one is at the alignment shop Obviously needed.. look at the driver side tire
These are the long travel so I would guess its sitting at right about 11-12" of lift or so here.
This one is at the alignment shop Obviously needed.. look at the driver side tire
I have the 7.5 Fab tech lift on my 03 now but I need more wheel travel for the California xesert. Where did you find the long travel kit for your truck? I also see that you have/had the 7.5 kit. Did you get to keep the tall spindles or.did.you have to buy new ones to make it work. How is the ride quality on and off road? Thank you so much for your time
Ryan
#59
#60
If you want more suspension travel for wheeling in the desert, you'll most likely have to start with a Dixon Bros kit.
Welcome to the internet, specifically, F150Online!