okay, so here is the deal.. i am ordering a 322 Livernois stroker teksid block with some BBR ported heads and cams for my car... this means i am gonna have a 3V with 33,000 miles on it and 1997 F-150 with a 2V non PI motor with 197,000 miles... ya'll see where i am going with this? thing is not sure how to get the wiring harness, intake and throttle body with a cable or maybe throttle by wire... i have seen a 3V in a fox so i know it can be done... i wonder if a 3V 04 up truck intake will fit on a mustang head? and if the intake will fit under a stock hood of a 1997 truck... anybody got any experience with a swap like this?

also does anyone know if the diff out of these trucks are 31 spline or 28? its an 8.8 diff... i have a posi unit out of a mustang that is 28 spline... i think the bearings are different but i can change them...

 

Im almost certain that the 4.6s in the 04 and up f150s were still 2v .. and the 8.8 has 31 spline axles and diff..

 

until 2009, and the OP needs to read up on the swap '01roush did to install a 3 vavle in his truck