1997 - 2003 F-150

Help with ID'ing a ford alarm system -'97f150

Thread Tools
 
Search this Thread
 
Old Feb 27, 2010 | 04:16 PM
  #1  
Brakeman's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2010
Posts: 5
Likes: 0
From: East TN
Help with ID'ing a ford alarm system -'97f150

OK, I've been trying to bring a '97 F150 back into running shape after getting it from my stepson. There are lots of little problems, as he dogged it pretty badly, but one thing that's not his fault is the quirky security system that it had installed when he got it. I think it is a dealership add on, but I'm not sure. I need to know because I can't program a new rke until I know what it is. The dealership closest to me tried but couldn't program the remote they sold me.

Here are pictures of the box and the old rke.

Do these look familiar to any of you?




Thanks for any help! I can't read a single number on anything..

Can it be removed?
 

Last edited by Brakeman; Feb 27, 2010 at 07:21 PM. Reason: Adding
Reply
Old Nov 17, 2010 | 04:47 PM
  #2  
Brakeman's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2010
Posts: 5
Likes: 0
From: East TN
oh well..
 
Reply
Old Nov 17, 2010 | 07:35 PM
  #3  
Tampa-Harley's Avatar
Senior Member
Joined: Aug 2000
Posts: 130
Likes: 1
From: Tampa, FL USA
this may be too late but there should be a button someplace underdash to turn system off if you don't have remote when entering vehicle. you push button while turning key to on. that turns alarm off and stops horn from going off. the system remotes are programed with this button too, dont remember how. The alam system was a dealer supplied and more than likely installed by them. all wires can be just removed except for the heavy wire that goes to the starter. this is the starter interupt. if the wires are not reconnected the vehicle will never start untill connected...
 
Reply




All times are GMT -4. The time now is 06:08 PM.