Transfer case plug/connector question
Transfer case plug/connector question
First off Merry Christmas everyone.
I just had to replace my tranny in my 98 F150 4.6 4x4 and I've got the new tranny in and almost everything bolted up but I might have a problem.
On the transfer case, drivers side, on the rear of the transfer case there's what looks like two plug connections, one right above the other. The top one is kind of rectangular and the bottom one is white and circular. I'm pretty sure I remember something (vacuum line?) being connected to the circular bottom one but I can't find the line for the life of me. Was there something there and if so where does it come from because I've felt all over and I can't find it.
Thanks guys.
I just had to replace my tranny in my 98 F150 4.6 4x4 and I've got the new tranny in and almost everything bolted up but I might have a problem.
On the transfer case, drivers side, on the rear of the transfer case there's what looks like two plug connections, one right above the other. The top one is kind of rectangular and the bottom one is white and circular. I'm pretty sure I remember something (vacuum line?) being connected to the circular bottom one but I can't find the line for the life of me. Was there something there and if so where does it come from because I've felt all over and I can't find it.
Thanks guys.
Someone, anyone? If someone could at least take a peek under their truck and let me know if there's a plug/line there I'd appreciate it. It's easily visible without crawling under the truck.
I've got two electrical connectors. One near the front which I think is the 4wd indicator and one on the tail which I'm imagining is the spedo? The plug I'm not sure of is right below that.
Edit: and thanks for taking a peek for me.



