Removing stock blocks?
Thread Starter
|
Member
Joined: Apr 2008
Posts: 22
Likes: 0
From: Greenville, Nc
Removing stock blocks?
Has anyone got any pics of a 01-03 4wd screw sitting on stock springs and torsion bars untouched with the rear factory blocks removed?
just wondering how it looked sitting level that way..just curious really
just wondering how it looked sitting level that way..just curious really
Senior Member
Joined: Oct 2005
Posts: 3,579
Likes: 1
From: Wilmington DE
Never seen one sitting like that... But somebody must of done it.
I have a kit on my 03 4X4 that dropped it 3" in the front and 4" in the back.
I'm thinking of removing the stock blocks in the back.
If you do that, you will need the U bolts from a 2WD. The stock ones don't have enough threads to work.
Phil
I have a kit on my 03 4X4 that dropped it 3" in the front and 4" in the back.
I'm thinking of removing the stock blocks in the back.
If you do that, you will need the U bolts from a 2WD. The stock ones don't have enough threads to work.
Phil