4wd low would engage
#1
4wd low would engage
I have a 2005 f150 King Ranch. if I put the truck in 4wd high I have 4x4. If I put it in 4wd low. the indicator light does not go on and there is not a change from 4 high to 4 low. The indicator light does illuminate when starting the truck so it does work. Thanks for any help.
#3
I had a problem sort of similer to this in my 06. 4wd would engage in low but not high. What the problem was is that the piece that allows the 4wd to engage in the front end was burred on the end and prevented the two pieces from sliding together. Im not sure too much about the technical aspect of this but i do know it cost around $350 at the local ford dealership to be fixed. hope this helps
#5
yeah make sure youre doing it right first, foot holding brake down while in neutral then turn the switch and hold your foot on the brake until the light turns on and you feel the thud. should be a couple seconds.
if that doesn't work then giving the motor a little tap will help if its stuck.
if that doesn't work then giving the motor a little tap will help if its stuck.
#7
I have a 2005 f150 King Ranch. if I put the truck in 4wd high I have 4x4. If I put it in 4wd low. the indicator light does not go on and there is not a change from 4 high to 4 low. The indicator light does illuminate when starting the truck so it does work. Thanks for any help.
Did you ever figure out what was wrong with 4 Low in your truck? I have the exact same problem with mine.