how would these 20x9 32mm offset pro comp 6009 look on my 2010 2wd xlt with a level kit and 275/60/20 or 305/50/20??

tires are cooper zeon ltz btw.

 

That's a sharp looking wheel man

 

post a pic of the actual truck.

 

will look like this.

 

im thinking 33s are going to be too big on a 2wd with just a level kit. i know they wont rub but i think 32s are going to look better.

 

The wheel choice will look great... The difference between 33" and 32" tires is only .5"s on the radius... The tires will only look different do to the width... the 33"s will be wider... either one will fit your truck...

 

I think you will find the 305/50 to be just fine. bigdog87 has a 2wd with a leveling kit and has 305/55's with the Cooper LTZ's also. Just make sure your backspacing is no less then 5" and id say you would be ok..

 

good looking wheel man

 

i guess the real options are 275/50/20 vs 305/50/20 then. just the main difference in width.

there should be 6.2 bs so im thinking the wheels will stick out a hair or flush.

 

If the BS is 6.2 inches they will stick out about 1/4 inch farther than the OEM wheels. I'd go with a leveling kit and some 305/55-20's personally.

 

I LIKE THE WHEEL!

 

nice

 

so will 1/4" sticking out be like a flush look or out a little?

 

I just purchased a set of 305/55/20 copper zeon ltz tires mounted on 20x8.5 35 mb yuma wheels but not sure how far they will stick out. would anyone know the answer?

 

Not without knowing the backspacing.