Doors rattles

Thread Tools
 
Search this Thread
 
Old Jun 26, 2009 | 08:51 PM
  #1  
ron wojack's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 25
Likes: 0
From: lansing mi
Doors rattles

I have a 2004 super cab every time I hit a bump or a hole in the road witch we have plenty in michigan.Something rattles in the doors. I took all the doors a part and foung broken pieces of hard plastic. They look like the were glued to the bottom at one time.Now something new is rattles ? Any help this is driving me nuts
 
Reply
Old Jun 28, 2009 | 11:03 AM
  #2  
ron wojack's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 25
Likes: 0
From: lansing mi
I must have the only truck that rattles and rolls down the road. Something rattles on the drivers side every bump!
 
Reply
Old Jul 24, 2009 | 12:33 PM
  #3  
TbaggsTruck's Avatar
Member
Joined: Aug 2007
Posts: 97
Likes: 0
From: New England
I have noticed on this site that nobody responds much to noise related issues. It is kind of tough to relay noise sounds while typing. Try taking the inside door panels off and have somebody else drive you down the bumpy roads so you can see and touch what may be causing it.

good luck
 
Reply
Old Jul 28, 2009 | 07:15 PM
  #4  
JWJR's Avatar
Member
Joined: Dec 2008
Posts: 23
Likes: 0
moms 01 supercrew did that and i just tightened up the screws on the bottem of the door panel and that fixed if for a few weeks. im sure they are backing out again.
 
Reply
Old Jul 28, 2009 | 07:25 PM
  #5  
fxr150's Avatar
Junior Member
Joined: Nov 2006
Posts: 2
Likes: 0
From: Texas
I feel your pain. My 06 Screw has a rattle in the headliner. Been to the dealer 3 times with no improvement. I'm gonna dig into it myself.
 
Reply
Old Jul 28, 2009 | 08:32 PM
  #6  
splogan's Avatar
Member
Joined: Feb 2008
Posts: 32
Likes: 0
I have a rattle driving me nuts in my drivers door as well. I have had the door half apart for days trying to find it. I think it has something to do with the window tract. I am not sure how to tighten that up but I damn sure am gonna try. Let us know if you find the source.
 
Reply




All times are GMT -4. The time now is 07:22 PM.