FYI (under drive pulleys)
FYI (under drive pulleys)
FYI i was trying to install my UD pulleys and the crank pulley wasn't cut deep enough and wouldn't go on the crank,,, pulled it back off as it only went on by 1/2" and inside there was a lip that stuck up a bit .....so check yours and make sure the inside of your crank pulley is smooth with out a lip in about a 1/4 to 1/2" ,,,,the lip was by the key way on mine and went 3/8" around away from the key on both sides
hope this isn't confusing but helpful not to get everthing apart and put it all back together,,,, but with the efans it wasn't so bad
BTW the set came from Troyer's group buy
hope this isn't confusing but helpful not to get everthing apart and put it all back together,,,, but with the efans it wasn't so bad

BTW the set came from Troyer's group buy
...edit...
Last edited by stoffer; Jun 29, 2009 at 05:34 AM. Reason: pointless thread not worth my time
Trending Topics
and NO i have not called troyer yet as it was friday at 9 PM when i learned about the problem i have. YES i will call troyer monday and let them know and am sure they will fix the problem... reason for posting to just let everyone know of the problem i had and to just inspect theirs to not get in the middle of the job and have put it back together
no harm i think just helpful i though
no harm i think just helpful i though
I'm sure it was helpful to someone in the same boat as you.
Tarajerame the point of the post was not to bash Troyer or call him out for not fixing something. It is great you are defending Troyer but there is not need for it here. Go back to the postings about his 4-5 month wait times on tunes.....Bye.
Tarajerame the point of the post was not to bash Troyer or call him out for not fixing something. It is great you are defending Troyer but there is not need for it here. Go back to the postings about his 4-5 month wait times on tunes.....Bye.
no shet, I don't even have this but am looking at getting UD power steering pulley for the wife's 07 expy. thank you for sharing I can only hope someone shares such info if/when I get something. I'm sure it suck'd donkey ballz to tear it apart and not have it work, Troyers fault or not I don't wanna tear into it only to have to put it all back and wait and see how it comes along
best of luck to u. to all the nuthuggers out there I got a pair feel free to come hug mine, I just got done hittin the wife from the back maybe u'll get a wiff... LOL
best of luck to u. to all the nuthuggers out there I got a pair feel free to come hug mine, I just got done hittin the wife from the back maybe u'll get a wiff... LOL






