Finally Its Gonna Happen
Thread Starter
|
Senior Member
Joined: Oct 2006
Posts: 996
Likes: 0
From: fairview heights,IL
you are close on one of those tarajerame, but i cant seem to spend $500 on a chiller even though they are very useful
Senior Member
Joined: Jul 2005
Posts: 1,463
Likes: 0
From: off the path in Louisiana
looks good and sounds good man. dang good. when august gets here mines going in the shop for a cam swap... would love to follow your build but the truck still has to carry me 500 miles to work once a month. that and the wife is being deployed and with me saving for the raptor.. gotta stick with the cams 
not trying to hijack your thread so guys pm me if you don't mind helping me gather what parts i need. i'm using the stock heads but i'm getting them cleaned up. i've got my comp cams, springs, and lifters.. what else am i needing?
not trying to hijack your thread so guys pm me if you don't mind helping me gather what parts i need. i'm using the stock heads but i'm getting them cleaned up. i've got my comp cams, springs, and lifters.. what else am i needing?
Thread Starter
|
Senior Member
Joined: Oct 2006
Posts: 996
Likes: 0
From: fairview heights,IL
Thread Starter
|
Senior Member
Joined: Oct 2006
Posts: 996
Likes: 0
From: fairview heights,IL
....little update..i've got 2 of my 3 parts sittin here in my living room..the 3rd and final mod should be here by next sat or mon i hope..then cruising to built54 installing and hanging out
Last edited by boss1984; Jun 23, 2009 at 11:31 PM.
Senior Member
Joined: Aug 2008
Posts: 554
Likes: 0
From: New Orleans, LA
I wanna be in the mod loop, hell i got your started in all this Forced Induction anyways 
What are you going to do to keep your IAT2 down if you add the smaller upper and 8# lower. That is spinning the blower SUPER HARD and may make more heat than power.
Wayne
What are you going to do to keep your IAT2 down if you add the smaller upper and 8# lower. That is spinning the blower SUPER HARD and may make more heat than power.
Wayne
Last edited by Z7What; Jun 24, 2009 at 07:26 PM.
Thread Starter
|
Senior Member
Joined: Oct 2006
Posts: 996
Likes: 0
From: fairview heights,IL
idk yet lol...however im not going with an 8lb lower because of the heat issues, so i changed my mind on that...i'd like to get a killer chiller but dont wanna spend that much money yet
Thread Starter
|
Senior Member
Joined: Oct 2006
Posts: 996
Likes: 0
From: fairview heights,IL
Senior Member
Joined: Aug 2008
Posts: 554
Likes: 0
From: New Orleans, LA
Wayne