Started my project in the 00 H.D., will post pictures as I go

 

Any hints as to what you're doing?

 

pointless thread without pictures or any insite as to what the project is.

 

Sorry, I posted that when I was at work I'm putting in dyno mat, I have a total of 13 speakers (some are tweets) that I've added to the A and C pillars, installing a new head unit, getting rid of the hideous ALL black theme inside, removing all of the factory ford radio harness (I'm OCD), I've split the rear 60/40 seat in the rear (Extended Cab truck) so my 12' Kicker sub sits in the middle, and installing seats from an 01 and up (seatbelts in the seats). As of now, there is only the drivers seat in the truck, I will get pictures of my progress as soon as I get to my computer at home to download pictures. I've also primed and sanded smooth all interior pieces, got alot of hours into this so far

 

Ok, here we go...

Mock up of the dash


an ALMOST done backseat


an organized mess


my arsenal. all kicker, except for the 3" RF Punch's and 1" RF Tweeters


more mess


wires ran under the carpet, leads ran to console speakers


More to come!

 

Subscribing. Looks like it's going to be pretty sweet when it's done.

 

You got a major project going on there! Post some pics along the way. Good Luck!

 

I wouldn't even know where to begin with the interior gutted like that. I bought new seats for my truck, and all I need is new brackets, and to hook up the power seats, and it has me stumped. You should take a trip to Cape May

 

I wouldnt be able to put it back together. Looking forward to the finished product!!

 

Some more progress pics... Headliner replacement, new seats, and let the paint fly!

 

Subscribing - looks like a good project!!

 

I'm going to use 1000 grit for the final finish, hoping to knock some of the shine off. I planned on gray, but it ended up silver....

 

You should have replaced your blend door while you had your dash out...

Looks good though.

 

Did the seat brackets match up, or did you have to change them up a little bit?

 

No difference in how the seats mount up. They're exactly the same


And here are some more painting pix for your pleasure... the main bezel, vents, and a mock up shot