Aftermarket COP's
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Let him use the Stang.
Senior Member
Joined: Mar 2008
Posts: 835
Likes: 2
From: Central New York
I was wondering why the Mustang wasn't being driven. Doesn't matter anyways, Uneek is in Cali, and he should get them by Tuesday latest, seeing that he lives in Cali as well.
Let's see, from Miami, after they clear quality control of course, then finish seminar on customer service 101, answer at least one of the 100+ calls they are going to get that day, packing, shipping, He should have them a week from Tuesday.
Sorry Brew, had to, were even
Last edited by tjk_in_cny; Feb 7, 2009 at 10:55 PM. Reason: info
Senior Member
Joined: Aug 2007
Posts: 961
Likes: 0
From: CA
Hehe, that is my DD/commuter right now as the Neon is still not 100% (needs an alignment and I have to drive it a tad more and then recheck torque on everything on the front). The GF is driving the truck because her Bronco needs a new engine. That thing is toast @ about 300,000 miles.
I was wondering why the Mustang wasn't being driven.
Doesn't matter anyways, Uneek is in Cali, and he should get them by Tuesday latest, seeing that he lives in Cali as well.
Let's see, from Miami, after they clear quality control of course, then finish seminar on customer service 101, answer at least one of the 100+ calls they are going to get that day, packing, shipping, He should have them a week from Tuesday.
Sorry Brew, had to, were even
You two are crazy! 
I was wondering why the Mustang wasn't being driven. Doesn't matter anyways, Uneek is in Cali, and he should get them by Tuesday latest, seeing that he lives in Cali as well.
Let's see, from Miami, after they clear quality control of course, then finish seminar on customer service 101, answer at least one of the 100+ calls they are going to get that day, packing, shipping, He should have them a week from Tuesday.
Sorry Brew, had to, were even
Senior Member
Joined: Mar 2008
Posts: 835
Likes: 2
From: Central New York
Hehe, that is my DD/commuter right now as the Neon is still not 100% (needs an alignment and I have to drive it a tad more and then recheck torque on everything on the front). The GF is driving the truck because her Bronco needs a new engine. That thing is toast @ about 300,000 miles.
You two are crazy!
You two are crazy!
Ye we have some fun, Brew ia a good guy to mess with and he mess's back pretty good.Hey Brew, can you check your Google Dictionary and see if "mess's" is a word.
I would appreciate proper pronunciation with that as well.
Senior Member
Joined: Aug 2007
Posts: 961
Likes: 0
From: CA
Mes-iz? lol
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Doesn't matter anyways, Uneek is in Cali, and he should get them by Tuesday latest, seeing that he lives in Cali as well.
Let's see, from Miami, after they clear quality control of course, then finish seminar on customer service 101, answer at least one of the 100+ calls they are going to get that day, packing, shipping, He should have them a week from Tuesday.
Sorry Brew, had to, were even
Let's see, from Miami, after they clear quality control of course, then finish seminar on customer service 101, answer at least one of the 100+ calls they are going to get that day, packing, shipping, He should have them a week from Tuesday.
Sorry Brew, had to, were even 
Last edited by jbrew; Feb 8, 2009 at 08:28 AM. Reason: Because I can
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 19
From: MI
Congrats
Senior Member
Joined: Mar 2008
Posts: 835
Likes: 2
From: Central New York
Topic, oh ye, COP's, make sure you use dielectric grease inside the boots when you intsall the new one's. There is varying opinions on how the grease should be applied. I put a light film of grease on the entire inside of the new boot. Be careful when removing the boot from the coil, you do not want to damage the spring. Good luck with your change over.
Last edited by tjk_in_cny; Feb 8, 2009 at 12:38 PM. Reason: info
Senior Member
Joined: Mar 2008
Posts: 835
Likes: 2
From: Central New York
Let us know when your done putting them in and how things are working.
Senior Member
Joined: Aug 2007
Posts: 961
Likes: 0
From: CA
Will do. I'm sure my dad will have them in tomorrow when he gets home from work providing they are there. He already has everything taken apart waiting for the new coils to go on. Need to remind him to get new plugs too just in case he hasn't...
Last edited by roushstage2; Feb 9, 2009 at 03:22 PM.
Senior Member
Joined: Mar 2008
Posts: 835
Likes: 2
From: Central New York
Will do. I'm sure my dad will have them in tomorrow when he gets home from work providing they are there. He already has everything taken apart waiting for the new coil packsARRGGG
you do not have coil packs, you have COP's, COIL OVER PLUGS 
to go on. Need to remind him to get new plugs too just in case he hasn't...MotorCraft only----RIGHT
you do not have coil packs, you have COP's, COIL OVER PLUGS to go on. Need to remind him to get new plugs too just in case he hasn't...MotorCraft only----RIGHT
Senior Member
Joined: Aug 2007
Posts: 961
Likes: 0
From: CA
Well, summbitch! LMFAO! I'll change it again. F'ing medicine!
And yes, Motorcraft Plugs from Autozone to go under the coils...
If Autozone doesn't have them for some reason, will probably go with NGK Platinums.
And yes, Motorcraft Plugs from Autozone to go under the coils...
If Autozone doesn't have them for some reason, will probably go with NGK Platinums.
Last edited by roushstage2; Feb 9, 2009 at 03:24 PM.