2004 - 2008 F-150

a lil help? puh puh puh please

Thread Tools
 
Search this Thread
 
  #1  
Old 04-01-2015, 08:23 PM
gtferrari's Avatar
Member
Thread Starter
Join Date: Nov 2014
Location: grand rapids, mi
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
a lil help? puh puh puh please

i have a bunch of connectors in my dash i need help identifying

3 are driver side behind the cluster/headlight switch
im guessing one is for the pedal position sensor for the memory package that my truck did not have but my current seats have

1 is mounted to the firewall and i am sure that it is my headliner harness that runs to the compass. i do not have the matching connector so im guessing the new dash harness is wired for a dimming mirror and the moonroof/power sliding rear and possibly the overhead entertainment

1 is a grey connector that is near the fuse box. my bet is the new ^

1 is a large 4 wire that has heavy gauge wires. im guessing for the eatc blower speed module. my truck was wired for the resistor pack bc of the manual climate but i have now gone to eatc and will need to acquire that but do not have a part number

there are a pair of connectors amongst the climate and radio connectors. these are not the parking sensors or traction control connectors

the last connector is behind the 12v dash power point



i have uploaded the pics to an album but im not sure how to get them into this post.



these connectors will be found on 07 and 08 f150s. and upper trim levels lariat, king ranch......
 
  #2  
Old 04-01-2015, 11:36 PM
Patman's Avatar
Global Moderator &
Senior Member



Join Date: Aug 2005
Location: DFW
Posts: 21,312
Received 134 Likes on 112 Posts
Behind the headlight switch



Behind Cluster



Behind the glove box



connector is near the passenger side fuse box



near the 12v power point



connector is located down by the eatc



connector is on the harness with the radio connections
 
  #3  
Old 04-01-2015, 11:41 PM
Patman's Avatar
Global Moderator &
Senior Member



Join Date: Aug 2005
Location: DFW
Posts: 21,312
Received 134 Likes on 112 Posts
(black 2x2 connector)
behind the glove box connector looks like pretty beefy terminals, possibly for blower motor resistor?
 
  #4  
Old 04-15-2015, 08:57 PM
gtferrari's Avatar
Member
Thread Starter
Join Date: Nov 2014
Location: grand rapids, mi
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
figured some of these out
pic 3 is the blower control module
pic 5 is for the line in port just above the radio
pic 7 is for sirius satellite module
 



Quick Reply: a lil help? puh puh puh please



All times are GMT -4. The time now is 06:37 AM.