i have a 96 F150 4x4 and i have had a lot of brake problems the rear breaks would not release after stopping they would just stick on. i replaced all of the components in the rear drums even the cylinders and now after less than 1000 miles the problem is coming back. any one have the same problem?

 

you may have to adjust the drum brakes so they don't stick.

 

your applying high temp lube for brakes at the contact points where the shoes lay against the axle flange

 

i did use high temp brake grease and it isnt they self adjusters
They only stick after stopping in traffic. they arent adjusted to tight