mazzi hulks with 3 in leveling kit?
 

i have the 3 inch leveling kit on my truck it says it will clear 35's will mazzi hulks fit on there with 35 procomp extreme all terains? i dont kno much about the back spacing i dont want the tires to stick out really far at least not much farther than my stock wheels with my 285's

What type of truck do you have?

o6 F-150 i may trade it in well i want to trade it in and get a 08 but i will be useing the same 3 inch leveling kit, there is alot of room for tire i just dontknow how it owuld look with the hulks and the back spacing

Have you installed the leveling kit already? if not, I would stay away from a 3" kit. Go with a 2.5" max!!! As for wheels, you should be looking for either a 8.5" or 9" wide wheel with a 5.5" to 6" backspace.

it depends on what size rim the hulks are. i was looking at 22x10 mazzi hulks and the offset was something like -44. that means the rim will stick out like 3-4 inches more than stock. i have a 2.5 leveling kit with 22" xd monster wheels @ +18 offset with 35" nitto terra grapplers and there is minor rubbing on fender flare when turning, no rubbing at all in the inside. hope that helps

4x2 or 4x4?

why stay away from 3 inch, and it 4 wheel drive

it stresses the front suspension and causes premature wear

stick with a 2.5 level kit and a 1.5 add a leaf in the rear.