I'm on the verge of getting some gear alloy wheels and have a few ?'s They are 20x10 with a 25mm offset (not sure - or +) and I'm gonna run a mickey thompson atz 305-55-20 tire. Is this gonna rub and if so how can I fix it? trimming? Also I want them to stick out a bit, will this offset allow them too? Thanks guys.

 

Is it a 4x4? Do you have the stock 18's or 20's?

If stock 18's with stock tires they would stick out about 4'' further than stock.....

I would think those would rub no matter if it is a 4x4 or not.....

 

Yeah its a 2007 4x4 with a 2.5 autospring kit. It has stock 18's on it. So it will stick out 4 inches and rub at full lock?

 

Are you sure you have that right??? 25mm offset makes them 1" on one side and 9" on the other. That cannot be made for an F150...

 

they would have 4.5'' backspacing.

1 inch more than stock
rims are 2.5'' wider
and the tires are about 1'' wider than stock, so that would be another half inch.

so 4''

edit: Oh, I see what you are saying, I looked and I didn't see any gear alloys that were 10'' wide, sure they aren't 9'' wide? I saw those in 6x135

 

I was not thinking he meant 1" more than stock I was thinking 1"/9" which made no sense at all... 4.5"/5.5" makes more sense

 

Ok, all this is confusing. The guy said they come in 20x10 and 20x9 but the the 20x9's would only stick out half an inch. So i should get 20x9 with a 4.5 backspacing? Any pics of how these would look as far as sticking out?

 

I think you would probly need to find some with 5.5-6'' bs

 

OK ended up ordering 20x9 with a 5.5bs with 305-55-20 mickey thompson atz's. Heres what the rims look like.

 

Thanks for your help guys.

 

those should be great... They'll stick out about 2'' further... Sweet Tires too!

 

I agree.