brake stroke doesn't seem right
 

i know that now days you shouldn't have to pump the brakes to really get them working. however i've noticed the past week that if i get on the brakes, doesn't matter if it's light or hard, the pedal stroke is longer than if i pumped it once. if i don't pump it the pedal goes down probably around 2-4" before it really grabs. if i do pump it the brakes grab almost instantly and the pedal stroke is maybe an inch.

fluid is fine and the pads seem like they still have a good bit of life in them.

anyone else ever noticed or experienced this??

hello? anyone home

Odds are you have an air bubble in the line. The first pump compresses it, the second pump gets better pressure. Time for a brake bleed.

-Joe

X2 Sounds right to me. Bleed the brakes out and I bet your problem disappears.--DIY

cool thanks guys

hopefully try it this weekend when i get some time.

[QUOTE=306stang]cool thanks guys

hopefully try it this weekend when i get some time.[/QUOT\


bleed them good ,go around twice.if you still have no luck id suspect master cylinder, booster