nitto 325/60/18 on a 2WD
#1
nitto 325/60/18 on a 2WD
I have a great deal from a friend that works at a tire shop and they have a set of Terra Grapplers 325/60/18s but only that size. What has to happen to make these fit a 2004 XLT 2wd? I have Eagle alloy 187s so the backspacing is cool just wondering if a 2.5 inch level and a block or add a leaf in the rear will make these look good.
If anyone has done this size on a 2wd please let me know and pics would be sweet too.
If anyone has done this size on a 2wd please let me know and pics would be sweet too.
#2
#3
#6
#7
Trending Topics
#10
I got them on! they did hit the black front valance at full lock. The shop took a set of air snips to them and trimmed of about 1/2 inch off and they are good to go. Hell they even put on my level kit on for free. I love the new look!!!!! Too dark to snap pics but will ASAP +PLUS+ my shakes are finally gone after two years
#13
Here you go pics in gallery.
Its been raining here for two days. So its a little messy
https://www.f150online.com/galleries....cfm?gnum=7188
Its been raining here for two days. So its a little messy
https://www.f150online.com/galleries....cfm?gnum=7188
#15
Originally Posted by 04xlt
I got them on! they did hit the black front valance at full lock. The shop took a set of air snips to them and trimmed of about 1/2 inch off and they are good to go. Hell they even put on my level kit on for free. I love the new look!!!!! Too dark to snap pics but will ASAP +PLUS+ my shakes are finally gone after two years
Thanks