light knock after rebuild

Thread Tools
 
Search this Thread
 
  #1  
Old 01-25-2018, 09:34 PM
surehands's Avatar
Junior Member
Thread Starter
Join Date: Jan 2018
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
light knock after rebuild

My 97 5.4 knocks after warming up. I'm trying to narrow down what it is from symptoms. its on driver side lower engine. It starts after it is warmed up. It starts to misfire and miss. Also getting some blow by fuel in oil. I also have a code for intake sensor. I think that's due to not being connected and I've connected it but code still there. Any help would be most appreciated!!!
 
  #2  
Old 01-25-2018, 11:09 PM
glc's Avatar
glc
glc is offline
Senior Member
Join Date: Dec 2006
Location: Joplin MO
Posts: 43,196
Received 759 Likes on 703 Posts
What is the exact numeric code?
 
  #3  
Old 01-25-2018, 11:41 PM
surehands's Avatar
Junior Member
Thread Starter
Join Date: Jan 2018
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by glc
what is the exact numeric code?
p0113
 
  #4  
Old 01-26-2018, 08:33 AM
ManualF150's Avatar
Technical Article Contributor

Join Date: Jan 2007
Location: Vernon, NY
Posts: 10,625
Received 259 Likes on 250 Posts
Even though you reconnect it, the code won't go away. You'll need to get it cleared, then drive it to see if it pops back up.
 



Quick Reply: light knock after rebuild



All times are GMT -4. The time now is 02:39 AM.