When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Changed plugs and wires. Now truck starts, runs rough and stalls
Just changed out plugs and wires. Now truck starts. Runs rough. Then stalls. Checked firing order 10 times. Its correct. Checked all wires. All snapped on. Still nothing.
Any ideas what's wrong would be great.
Thanks.
Sorry about that. I apologize. I'm working on a 1990 f150. I just picked it up. Wanted to go a tune up on it. After all is done. It starts real rough and then dies at idle.
Check for vacuum leaks. Check the EGR system, a EGR valve stuck open can cause poor idle and stalls. Other things to look at are the TPS, IAC, and MAP sensor. Check the distributor cap and rotor. Check the ignition timing.
If the engine is original, it's 15426378. 13726548 is the HO firing order which was used in the 5.8 and Mustang 5.0. I believe the truck went HO in 1994.