My trucks dtc's
 

Alrighty i went in my hypertech programmer and wrote down the dtc's i had listed. I have no idea what they mean. So here it goes..

P1000
P1AEE
P0008


if anyone knows what those are please let me asap..

P1000 = not all sensors ready for testing. Should clear after several drive cycles.

Searching on the other 2, they appear to be diesel codes.................

Go to Autozone and get the codes read with a standard scanner and see what you find.

My little dtc lookup program says p0008 is an "engine position performance (bank 1)". Thats all I can tell you. The other code, I've not got a clue:beers:

Right, and that's a diesel code.

Actually, the last two are "garbage codes" caused by the Hypertech's inability to properly communicate with the PCM.

Contact them for technical assistance.

It is not a Ford issue and has nothing to do with "diesel codes". That code was not used by Ford in 1998.