rattle in 4.2

Old Aug 17, 2010 | 09:28 PM
  #1  
ickfinger's Avatar
Thread Starter
|
Member
Joined: Aug 2010
Posts: 30
Likes: 0
rattle in 4.2

hi all, new to forum. My 4.2 1998 150 has a slight tick at about 2500 rpm that comes and goes everytime i keep engine at or around that rpm. It will clatter all the time if i maintain 2000 rpms, but does not make any noise if i accel hard or short shift. Im almost leaning toward a bad rocker or lifter. Engine runs great, doesnt burn or leak any oil has 140k and a cold air kit. Also gets pretty good fuel mileage. Any help would be appreciated
 
Reply
Old Aug 17, 2010 | 10:21 PM
  #2  
blackedoutV6's Avatar
Senior Member
Joined: May 2008
Posts: 2,703
Likes: 1
From: Friendswood, Texas
there are 2 brackets that are attached to your exhaust manifolds, one on each side of the engine.

theyre probably broken, so remove them.
 
Reply
Old Aug 17, 2010 | 10:49 PM
  #3  
ickfinger's Avatar
Thread Starter
|
Member
Joined: Aug 2010
Posts: 30
Likes: 0
ive noticed the dipstick is not tight, is this a mounting bracket you are talking about? I thought the noise was internal. Thanks and ill check in daylight
 
Reply
Old Aug 18, 2010 | 01:04 PM
  #4  
glc's Avatar
glc
Senior Member
15 Year Member
Veteran: Navy
Veteran: Reserves
Joined: Dec 2006
Posts: 43,538
Likes: 817
From: Joplin MO
He's talking about the engine lifting brackets, but if the dipstick is loose, that could be what it is.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:39 PM.