2022 FORD BRONCO Recalls

Recall information provided by National Highway Traffic Safety Administration

Expand all

BACK OVER PREVENTION: SOFTWARE

Running Sequence Number: 320184
Campaign Number: 26V124000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver?s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005230749000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant ? 21-22MY Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SOFTWARE

Running Sequence Number: 320183
Campaign Number: 26V124000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver?s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005230749000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant ? 21-23MY Edge
Manufacturer-Supplied Component Part Number: NU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SOFTWARE

Running Sequence Number: 320182
Campaign Number: 26V124000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver?s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005230749000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant ? 22-24MY Bronco
Manufacturer-Supplied Component Part Number: PU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SOFTWARE

Running Sequence Number: 320181
Campaign Number: 26V124000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver?s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005230749000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant ? 24MY Edge
Manufacturer-Supplied Component Part Number: RU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SOFTWARE

Running Sequence Number: 320180
Campaign Number: 26V124000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver?s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005230749000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant ? 25MY Bronco
Manufacturer-Supplied Component Part Number: SU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SOFTWARE

Running Sequence Number: 320179
Campaign Number: 26V124000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver?s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005230749000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant ? 26MY Bronco
Manufacturer-Supplied Component Part Number: VU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302789
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-FS
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302791
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-FR
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302792
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-FP
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302788
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-KJ
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302787
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-KU
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302786
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MD
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302785
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MG
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302784
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MH
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302782
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MJ
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 302781
Campaign Number: 25V888000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C72
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: Mar 13, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 35
Date Owner Notified: Jan 28, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 18, 2025
Record Creation Date: Dec 22, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.
Notes: N/A
Recall Component ID: 000260876005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MP
Do Not Drive: No
Park Outside: No
SEATS: CRITICAL FASTENERS

Running Sequence Number: 297138
Campaign Number: 25V721000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25SB5
Component Name: SEATS: CRITICAL FASTENERS
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 163256
Date Owner Notified: N/A
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Oct 23, 2025
Record Creation Date: Oct 24, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles. The front seats may have a loose or dislodged seat frame height-adjust pivot bolt.
Consequence: A seat with a dislodged bolt may not properly restrain an occupant in a crash, increasing the risk of injury.
Remedy: Dealers will replace the pivot links and bolts, free of charge. Interim letters, notifying owners of the safety risk, were mailed November 6, 2025. Additional letters will be sent once the final remedy is available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SB5. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning October 28, 2025.
Notes: N/A
Recall Component ID: 000260685005230749000001846
Manufacturer-Supplied Component Name: Front Pivot Link
Manufacturer-Supplied Component Description: RH & LH Front Height Adjust Linkages
Manufacturer-Supplied Component Part Number: MU5A-61937-AB; MU5A-61937-BB; MU5A-61936-AB; MU5A-61936-BB
Do Not Drive: No
Park Outside: No
EQUIPMENT: ELECTRICAL: ENGINE BLOCK HEATER

Running Sequence Number: 309799
Campaign Number: 25V685000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25SA4
Component Name: EQUIPMENT: ELECTRICAL: ENGINE BLOCK HEATER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 59006
Date Owner Notified: N/A
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Oct 10, 2025
Record Creation Date: Oct 14, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2016-2019 Lincoln MKC, 2016-2023 Explorer, 2019-2020 Fusion, 2019-2024 Ranger, 2020-2022 Lincoln Corsair, Escape, 2021-2024 Bronco, Bronco Sport, and 2022-2024 Maverick vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Consequence: An electrical short circuit can increase the risk of a fire.
Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Interim letters, notifying owners of the safety risk, were mailed December 3, 2025. Additional letters will be sent once the final remedy is available, anticipated September 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 15, 2025.
Notes: N/A
Recall Component ID: 000260645005230749000002087
Manufacturer-Supplied Component Name: Engine Block Heater
Manufacturer-Supplied Component Description: Engine Block Heater
Manufacturer-Supplied Component Part Number: GJ7T-6A051-AA
Do Not Drive: No
Park Outside: No
EQUIPMENT: ELECTRICAL: ENGINE BLOCK HEATER

Running Sequence Number: 309798
Campaign Number: 25V685000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25SA4
Component Name: EQUIPMENT: ELECTRICAL: ENGINE BLOCK HEATER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 59006
Date Owner Notified: N/A
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Oct 10, 2025
Record Creation Date: Oct 14, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2016-2019 Lincoln MKC, 2016-2023 Explorer, 2019-2020 Fusion, 2019-2024 Ranger, 2020-2022 Lincoln Corsair, Escape, 2021-2024 Bronco, Bronco Sport, and 2022-2024 Maverick vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Consequence: An electrical short circuit can increase the risk of a fire.
Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Interim letters, notifying owners of the safety risk, were mailed December 3, 2025. Additional letters will be sent once the final remedy is available, anticipated September 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 15, 2025.
Notes: N/A
Recall Component ID: 000260645005230749000002087
Manufacturer-Supplied Component Name: Engine Block Heater
Manufacturer-Supplied Component Description: Engine Block Heater
Manufacturer-Supplied Component Part Number: GJ7T-6A051-BA
Do Not Drive: No
Park Outside: No
FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

Running Sequence Number: 312556
Campaign Number: 25V455000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S75
Component Name: FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 850318
Date Owner Notified: N/A
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jul 7, 2025
Record Creation Date: Jul 8, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.
Consequence: An engine stall increases the risk of a crash.
Remedy: The remedy is under development. Interim notification letters notifying owners of the safety risk were mailed July 16, 2025. Second letters will be sent once the remedy is available, anticipated 2nd Quarter 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.
Notes: N/A
Recall Component ID: 000260351005230749000000152
Manufacturer-Supplied Component Name: SDR & PMP ASY FU/TNK
Manufacturer-Supplied Component Description: Fuel Delivery Module ? Ford Super Duty
Manufacturer-Supplied Component Part Number: LC34-9H307-** And PC34-9H307-**
Do Not Drive: No
Park Outside: No
FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

Running Sequence Number: 312557
Campaign Number: 25V455000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S75
Component Name: FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 850318
Date Owner Notified: N/A
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jul 7, 2025
Record Creation Date: Jul 8, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.
Consequence: An engine stall increases the risk of a crash.
Remedy: The remedy is under development. Interim notification letters notifying owners of the safety risk were mailed July 16, 2025. Second letters will be sent once the remedy is available, anticipated 2nd Quarter 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.
Notes: N/A
Recall Component ID: 000260351005230749000000152
Manufacturer-Supplied Component Name: SDR & PMP ASY FU/TNK
Manufacturer-Supplied Component Description: Fuel Delivery Module ? Ford Mustang
Manufacturer-Supplied Component Part Number: JR3C-9H307-**
Do Not Drive: No
Park Outside: No
FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

Running Sequence Number: 312558
Campaign Number: 25V455000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S75
Component Name: FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 850318
Date Owner Notified: N/A
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jul 7, 2025
Record Creation Date: Jul 8, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.
Consequence: An engine stall increases the risk of a crash.
Remedy: The remedy is under development. Interim notification letters notifying owners of the safety risk were mailed July 16, 2025. Second letters will be sent once the remedy is available, anticipated 2nd Quarter 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.
Notes: N/A
Recall Component ID: 000260351005230749000000152
Manufacturer-Supplied Component Name: SDR & PMP ASY FU/TNK
Manufacturer-Supplied Component Description: Fuel Delivery Module ? Ford Explorer / Lincoln Aviator
Manufacturer-Supplied Component Part Number: L1M3-9H307-**
Do Not Drive: No
Park Outside: No
FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

Running Sequence Number: 312714
Campaign Number: 25V455000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S75
Component Name: FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 850318
Date Owner Notified: N/A
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jul 7, 2025
Record Creation Date: Jul 8, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.
Consequence: An engine stall increases the risk of a crash.
Remedy: The remedy is under development. Interim notification letters notifying owners of the safety risk were mailed July 16, 2025. Second letters will be sent once the remedy is available, anticipated 2nd Quarter 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.
Notes: N/A
Recall Component ID: 000260351005230749000000152
Manufacturer-Supplied Component Name: SDR & PMP ASY FU/TNK
Manufacturer-Supplied Component Description: Fuel Delivery Module ? Ford Expedition / Lincoln Navigator
Manufacturer-Supplied Component Part Number: NL14-9H307-**
Do Not Drive: No
Park Outside: No
FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

Running Sequence Number: 312721
Campaign Number: 25V455000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S75
Component Name: FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 850318
Date Owner Notified: N/A
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jul 7, 2025
Record Creation Date: Jul 8, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.
Consequence: An engine stall increases the risk of a crash.
Remedy: The remedy is under development. Interim notification letters notifying owners of the safety risk were mailed July 16, 2025. Second letters will be sent once the remedy is available, anticipated 2nd Quarter 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.
Notes: N/A
Recall Component ID: 000260351005230749000000152
Manufacturer-Supplied Component Name: SDR & PMP ASY FU/TNK
Manufacturer-Supplied Component Description: Fuel Delivery Module ? Ford Bronco
Manufacturer-Supplied Component Part Number: MB3G-9H307-**
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SOFTWARE

Running Sequence Number: 293290
Campaign Number: 25V315000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S49
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1076138
Date Owner Notified: Oct 8, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 14, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128249005230749000001881
Manufacturer-Supplied Component Name: Accessory Protocol Interface Module (APIM)
Manufacturer-Supplied Component Description: MOD.ASY.SCL.CONN.M/MEDIA
Manufacturer-Supplied Component Part Number: NU5T-14G682-*
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 315222
Campaign Number: 25V273000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S48
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Aug 31, 2021
End Date of Manufacturing: Oct 31, 2023
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 128889
Date Owner Notified: Oct 8, 2025
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 14, 2025
Record Creation Date: Apr 24, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 Bronco vehicles. The 360-degree view camera may not display a rearview image when the vehicle is placed in reverse.
Consequence: Loss of the rearview camera image can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will replace the rearview camera, free of charge. Owner notification letters were mailed October 8, 2025. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 23S48. This recall expands previous recall number 23V-598.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128185005230749000001568
Manufacturer-Supplied Component Name: CMR RR FAC VEH DTCT
Manufacturer-Supplied Component Description: Bronco Digital Rearview Camera
Manufacturer-Supplied Component Part Number: M2DT-19G490-BA
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SOFTWARE

Running Sequence Number: 293289
Campaign Number: 25V315000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S49
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1076138
Date Owner Notified: Oct 8, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 14, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128249005230749000001881
Manufacturer-Supplied Component Name: Accessory Protocol Interface Module (APIM)
Manufacturer-Supplied Component Description: MOD.ASY.SCL.CONN.M/MEDIA
Manufacturer-Supplied Component Part Number: PU5T-14G682-*
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 316904
Campaign Number: 25V312000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C14
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: May 18, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 12219
Date Owner Notified: Jun 18, 2025
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 9, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were repaired incorrectly under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealers will update SYNC module software, free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C14.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128246005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-LD
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 316903
Campaign Number: 25V312000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C14
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: May 18, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 12219
Date Owner Notified: Jun 18, 2025
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 9, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were repaired incorrectly under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealers will update SYNC module software, free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C14.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128246005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-LH
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 316902
Campaign Number: 25V312000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C14
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: May 18, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 12219
Date Owner Notified: Jun 18, 2025
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 9, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were repaired incorrectly under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealers will update SYNC module software, free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C14.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128246005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-LP
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 316901
Campaign Number: 25V312000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C14
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: May 18, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 12219
Date Owner Notified: Jun 18, 2025
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 9, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were repaired incorrectly under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealers will update SYNC module software, free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C14.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128246005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MD
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 316900
Campaign Number: 25V312000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C14
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: May 18, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 12219
Date Owner Notified: Jun 18, 2025
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 9, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were repaired incorrectly under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealers will update SYNC module software, free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C14.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128246005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MH
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 316899
Campaign Number: 25V312000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25C14
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: May 18, 2022
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 12219
Date Owner Notified: Jun 18, 2025
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 9, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were repaired incorrectly under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: Dealers will update SYNC module software, free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C14.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128246005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MP
Do Not Drive: No
Park Outside: No
SUSPENSION: REAR: SHOCK ABSORBER

Running Sequence Number: 308734
Campaign Number: 25V025000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S01
Component Name: SUSPENSION: REAR: SHOCK ABSORBER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: Jul 23, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 149449
Date Owner Notified: Aug 15, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jan 17, 2025
Record Creation Date: Jan 21, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco vehicles. The rear shock absorbers may corrode and fail, resulting in detachment of the external reservoir.
Consequence: An external reservoir that detaches from a vehicle can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will replace the rear shock absorbers, as necessary free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S01.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Recall Component ID: 000127866005230749000000056
Manufacturer-Supplied Component Name: Shock Absorber
Manufacturer-Supplied Component Description: Rear Shock Absorber ? Badlands Trim with Capable Suspension, Long Wheel Base
Manufacturer-Supplied Component Part Number: MB3C-18080-ARJ
Do Not Drive: No
Park Outside: No
SUSPENSION: REAR: SHOCK ABSORBER

Running Sequence Number: 308733
Campaign Number: 25V025000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S01
Component Name: SUSPENSION: REAR: SHOCK ABSORBER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: Jul 23, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 149449
Date Owner Notified: Aug 15, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jan 17, 2025
Record Creation Date: Jan 21, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco vehicles. The rear shock absorbers may corrode and fail, resulting in detachment of the external reservoir.
Consequence: An external reservoir that detaches from a vehicle can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will replace the rear shock absorbers, as necessary free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S01.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Recall Component ID: 000127866005230749000000056
Manufacturer-Supplied Component Name: Shock Absorber
Manufacturer-Supplied Component Description: Rear Shock Absorber ? Badlands Trim with Capable Suspension, Long Wheel Base
Manufacturer-Supplied Component Part Number: MB3C-18080-ARK
Do Not Drive: No
Park Outside: No
SUSPENSION: REAR: SHOCK ABSORBER

Running Sequence Number: 308727
Campaign Number: 25V025000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S01
Component Name: SUSPENSION: REAR: SHOCK ABSORBER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: Jul 23, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 149449
Date Owner Notified: Aug 15, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jan 17, 2025
Record Creation Date: Jan 21, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco vehicles. The rear shock absorbers may corrode and fail, resulting in detachment of the external reservoir.
Consequence: An external reservoir that detaches from a vehicle can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will replace the rear shock absorbers, as necessary free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S01.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Recall Component ID: 000127866005230749000000056
Manufacturer-Supplied Component Name: Shock Absorber
Manufacturer-Supplied Component Description: Rear Shock Absorber ? Sasquatch Trim, Short Wheel Base
Manufacturer-Supplied Component Part Number: MB3C-18080-RAK
Do Not Drive: No
Park Outside: No
SUSPENSION: REAR: SHOCK ABSORBER

Running Sequence Number: 308731
Campaign Number: 25V025000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S01
Component Name: SUSPENSION: REAR: SHOCK ABSORBER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: Jul 23, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 149449
Date Owner Notified: Aug 15, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jan 17, 2025
Record Creation Date: Jan 21, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco vehicles. The rear shock absorbers may corrode and fail, resulting in detachment of the external reservoir.
Consequence: An external reservoir that detaches from a vehicle can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will replace the rear shock absorbers, as necessary free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S01.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Recall Component ID: 000127866005230749000000056
Manufacturer-Supplied Component Name: Shock Absorber
Manufacturer-Supplied Component Description: Rear Shock Absorber ? Badlands Trim with Capable Suspension, Short Wheel Base
Manufacturer-Supplied Component Part Number: MB3C-18080-APH
Do Not Drive: No
Park Outside: No
SUSPENSION: REAR: SHOCK ABSORBER

Running Sequence Number: 308728
Campaign Number: 25V025000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S01
Component Name: SUSPENSION: REAR: SHOCK ABSORBER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: Jul 23, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 149449
Date Owner Notified: Aug 15, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jan 17, 2025
Record Creation Date: Jan 21, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco vehicles. The rear shock absorbers may corrode and fail, resulting in detachment of the external reservoir.
Consequence: An external reservoir that detaches from a vehicle can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will replace the rear shock absorbers, as necessary free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S01.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Recall Component ID: 000127866005230749000000056
Manufacturer-Supplied Component Name: Shock Absorber
Manufacturer-Supplied Component Description: Rear Shock Absorber ? Sasquatch Trim, Short Wheel Base
Manufacturer-Supplied Component Part Number: MB3C-18080-RAJ
Do Not Drive: No
Park Outside: No
SUSPENSION: REAR: SHOCK ABSORBER

Running Sequence Number: 308729
Campaign Number: 25V025000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S01
Component Name: SUSPENSION: REAR: SHOCK ABSORBER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: Jul 23, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 149449
Date Owner Notified: Aug 15, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jan 17, 2025
Record Creation Date: Jan 21, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco vehicles. The rear shock absorbers may corrode and fail, resulting in detachment of the external reservoir.
Consequence: An external reservoir that detaches from a vehicle can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will replace the rear shock absorbers, as necessary free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S01.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Recall Component ID: 000127866005230749000000056
Manufacturer-Supplied Component Name: Shock Absorber
Manufacturer-Supplied Component Description: Rear Shock Absorber ? Sasquatch Trim, Long Wheel Base
Manufacturer-Supplied Component Part Number: MB3C-18080-RBK
Do Not Drive: No
Park Outside: No
SUSPENSION: REAR: SHOCK ABSORBER

Running Sequence Number: 308730
Campaign Number: 25V025000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 25S01
Component Name: SUSPENSION: REAR: SHOCK ABSORBER
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: Sep 23, 2020
End Date of Manufacturing: Jul 23, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 149449
Date Owner Notified: Aug 15, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jan 17, 2025
Record Creation Date: Jan 21, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco vehicles. The rear shock absorbers may corrode and fail, resulting in detachment of the external reservoir.
Consequence: An external reservoir that detaches from a vehicle can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will replace the rear shock absorbers, as necessary free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S01.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Recall Component ID: 000127866005230749000000056
Manufacturer-Supplied Component Name: Shock Absorber
Manufacturer-Supplied Component Description: Rear Shock Absorber ? Badlands Trim with Capable Suspension, Short Wheel Base
Manufacturer-Supplied Component Part Number: MB3C-18080-APJ
Do Not Drive: No
Park Outside: No
ENGINE AND ENGINE COOLING: ENGINE: HARD PARTS INTERNAL/MECHANICAL

Running Sequence Number: 255967
Campaign Number: 24V635000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 24S55
Component Name: ENGINE AND ENGINE COOLING: ENGINE: HARD PARTS INTERNAL/MECHANICAL
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: May 1, 2021
End Date of Manufacturing: Oct 30, 2021
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 90736
Date Owner Notified: Jul 3, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Aug 23, 2024
Record Creation Date: Aug 26, 2024
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Component ID: 000127358005230749000001679
Manufacturer-Supplied Component Name: Intake Valve
Manufacturer-Supplied Component Description: 2.7L / 3.0L Nano Intake Valve
Manufacturer-Supplied Component Part Number: JT4E-6507-AB
Do Not Drive: No
Park Outside: No
EQUIPMENT: OTHER: LABELS

Running Sequence Number: 245665
Campaign Number: 23V379000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C18
Component Name: EQUIPMENT: OTHER: LABELS
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 29607
Date Owner Notified: Jul 21, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 26, 2023
Record Creation Date: May 30, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 110
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 Bronco, 2023 Super Duty F-250, and 2019-2023 Ranger vehicles. The Tire and Loading Information (TREAD) label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence: An overloaded vehicle increases the risk of a crash.
Remedy: Ford will mail a new TREAD label to install over the existing label, free of charge. Owners will also have the option to take their vehicle to a Ford or Lincoln dealer to have the new label installed, free of charge. Owner notification letters were mailed July 21, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C18.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000125245005230749000000349
Manufacturer-Supplied Component Name: Tire & Loading Information Label
Manufacturer-Supplied Component Description: Tire & Loading Information Label
Manufacturer-Supplied Component Part Number: 5U5A-1532-AA
Do Not Drive: No
Park Outside: No
SEAT BELTS: CRITICAL FASTENERS

Running Sequence Number: 242376
Campaign Number: 23V358000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C16
Component Name: SEAT BELTS: CRITICAL FASTENERS
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 175550
Date Owner Notified: Sep 29, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 18, 2023
Record Creation Date: May 19, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 208
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles built with the 5-Door body style. The first-row seat belt latch plates may be difficult to access from their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Consequence: Difficulty accessing the seat belt latches may result in occupants not wearing their seat belts, increasing the risk of injury in a crash.
Remedy: Dealers will add a sliding clip latch stop to the driver and front passenger seat belts, free of charge. Interim owner notification letters notifying owners of the safety risk were mailed July 14, 2023. Owner letters informing owners that parts are available were mailed on October 2, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C16.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000125199005230749000001836
Manufacturer-Supplied Component Name: Driver Seat Belt
Manufacturer-Supplied Component Description: Driver Seat Belt
Manufacturer-Supplied Component Part Number: MB3B 58612D64 ADW
Do Not Drive: No
Park Outside: No
SEAT BELTS: CRITICAL FASTENERS

Running Sequence Number: 242373
Campaign Number: 23V358000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C16
Component Name: SEAT BELTS: CRITICAL FASTENERS
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 175550
Date Owner Notified: Sep 29, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 18, 2023
Record Creation Date: May 19, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 208
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles built with the 5-Door body style. The first-row seat belt latch plates may be difficult to access from their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Consequence: Difficulty accessing the seat belt latches may result in occupants not wearing their seat belts, increasing the risk of injury in a crash.
Remedy: Dealers will add a sliding clip latch stop to the driver and front passenger seat belts, free of charge. Interim owner notification letters notifying owners of the safety risk were mailed July 14, 2023. Owner letters informing owners that parts are available were mailed on October 2, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C16.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000125199005230749000001836
Manufacturer-Supplied Component Name: Passenger Seat Belt
Manufacturer-Supplied Component Description: Passenger Seat Belt ? Raptor
Manufacturer-Supplied Component Part Number: N2DV 58612D65 ACW
Do Not Drive: No
Park Outside: No
SEAT BELTS: CRITICAL FASTENERS

Running Sequence Number: 242374
Campaign Number: 23V358000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C16
Component Name: SEAT BELTS: CRITICAL FASTENERS
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 175550
Date Owner Notified: Sep 29, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 18, 2023
Record Creation Date: May 19, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 208
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles built with the 5-Door body style. The first-row seat belt latch plates may be difficult to access from their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Consequence: Difficulty accessing the seat belt latches may result in occupants not wearing their seat belts, increasing the risk of injury in a crash.
Remedy: Dealers will add a sliding clip latch stop to the driver and front passenger seat belts, free of charge. Interim owner notification letters notifying owners of the safety risk were mailed July 14, 2023. Owner letters informing owners that parts are available were mailed on October 2, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C16.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000125199005230749000001836
Manufacturer-Supplied Component Name: Passenger Seat Belt
Manufacturer-Supplied Component Description: Passenger Seat Belt
Manufacturer-Supplied Component Part Number: MB3B 58612D65 ADW
Do Not Drive: No
Park Outside: No
SEAT BELTS: CRITICAL FASTENERS

Running Sequence Number: 242375
Campaign Number: 23V358000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C16
Component Name: SEAT BELTS: CRITICAL FASTENERS
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 175550
Date Owner Notified: Sep 29, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 18, 2023
Record Creation Date: May 19, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 208
Summary: Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles built with the 5-Door body style. The first-row seat belt latch plates may be difficult to access from their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Consequence: Difficulty accessing the seat belt latches may result in occupants not wearing their seat belts, increasing the risk of injury in a crash.
Remedy: Dealers will add a sliding clip latch stop to the driver and front passenger seat belts, free of charge. Interim owner notification letters notifying owners of the safety risk were mailed July 14, 2023. Owner letters informing owners that parts are available were mailed on October 2, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C16.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000125199005230749000001836
Manufacturer-Supplied Component Name: Driver Seat Belt
Manufacturer-Supplied Component Description: Driver Seat Belt ? Raptor
Manufacturer-Supplied Component Part Number: N2DV 58612D64 ACW
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241788
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MJ
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241789
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MH
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241790
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MG
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241791
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MD
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241792
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-KU
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241793
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-KJ
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241794
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-FS
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241795
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-FR
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241796
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2021 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-FP
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 241787
Campaign Number: 23V165000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23C05
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1651
Date Owner Notified: Oct 26, 2023
INFLUENCED_BY: OVSC
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 10, 2023
Record Creation Date: Mar 13, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124905005230749000001568
Manufacturer-Supplied Component Name: Sync Software
Manufacturer-Supplied Component Description: 2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MP
Do Not Drive: No
Park Outside: No
STEERING

Running Sequence Number: 243545
Campaign Number: 23V155000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S09
Component Name: STEERING
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 343
Date Owner Notified: Mar 31, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 8, 2023
Record Creation Date: Mar 9, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2023 Bronco Wildtrak and 2022 Bronco Raptor vehicles. Internal damage to the steering gear may require increased steering effort or cause the steering wheel to lock-up.
Consequence: A steering wheel that locks-up can result in a complete loss of steering control, increasing the risk of a crash.
Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Dealers will replace the steering gear, free of charge. Owner notification letters were mailed March 31, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S09.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124878005230749000000001
Manufacturer-Supplied Component Name: Steering Gear
Manufacturer-Supplied Component Description: Steering Gear
Manufacturer-Supplied Component Part Number: NB3V-3D070-AF
Do Not Drive: No
Park Outside: No
STEERING

Running Sequence Number: 243544
Campaign Number: 23V155000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S09
Component Name: STEERING
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 343
Date Owner Notified: Mar 31, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 8, 2023
Record Creation Date: Mar 9, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2023 Bronco Wildtrak and 2022 Bronco Raptor vehicles. Internal damage to the steering gear may require increased steering effort or cause the steering wheel to lock-up.
Consequence: A steering wheel that locks-up can result in a complete loss of steering control, increasing the risk of a crash.
Remedy: Owners are advised not to drive their vehicles until the remedy is performed. Dealers will replace the steering gear, free of charge. Owner notification letters were mailed March 31, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S09.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124878005230749000000001
Manufacturer-Supplied Component Name: Steering Gear
Manufacturer-Supplied Component Description: Steering Gear
Manufacturer-Supplied Component Part Number: NB3V-3D070-BD
Do Not Drive: No
Park Outside: No
POWER TRAIN: AUTOMATIC TRANSMISSION

Running Sequence Number: 243049
Campaign Number: 23V070000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S06
Component Name: POWER TRAIN: AUTOMATIC TRANSMISSION
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1138
Date Owner Notified: Apr 25, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Feb 10, 2023
Record Creation Date: Feb 10, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 F-150, Mustang, Explorer, Bronco, and 2023 Lincoln Aviator vehicles equipped with automatic transmissions. The transmission may contain a loose bolt which could prevent the transmission from engaging the park gear, although the gear shifter position may indicate that the vehicle has been shifted to "PARK."
Consequence: The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury.
Remedy: Dealers will inspect and, if necessary, replace the transmissions, free of charge. Owner notification letters were mailed April 25, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S06.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124715005230749000000180
Manufacturer-Supplied Component Name: 10 Speed Automatic Transmission Assembly
Manufacturer-Supplied Component Description: Automatic Transmission Assembly
Manufacturer-Supplied Component Part Number: MB3P-7000-RD
Do Not Drive: No
Park Outside: No
POWER TRAIN: AUTOMATIC TRANSMISSION

Running Sequence Number: 243048
Campaign Number: 23V070000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S06
Component Name: POWER TRAIN: AUTOMATIC TRANSMISSION
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1138
Date Owner Notified: Apr 25, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Feb 10, 2023
Record Creation Date: Feb 10, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 F-150, Mustang, Explorer, Bronco, and 2023 Lincoln Aviator vehicles equipped with automatic transmissions. The transmission may contain a loose bolt which could prevent the transmission from engaging the park gear, although the gear shifter position may indicate that the vehicle has been shifted to "PARK."
Consequence: The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury.
Remedy: Dealers will inspect and, if necessary, replace the transmissions, free of charge. Owner notification letters were mailed April 25, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S06.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124715005230749000000180
Manufacturer-Supplied Component Name: 10 Speed Automatic Transmission Assembly
Manufacturer-Supplied Component Description: Automatic Transmission Assembly
Manufacturer-Supplied Component Part Number: ML38-7000-EA
Do Not Drive: No
Park Outside: No
POWER TRAIN: AUTOMATIC TRANSMISSION

Running Sequence Number: 243050
Campaign Number: 23V070000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S06
Component Name: POWER TRAIN: AUTOMATIC TRANSMISSION
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1138
Date Owner Notified: Apr 25, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Feb 10, 2023
Record Creation Date: Feb 10, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 F-150, Mustang, Explorer, Bronco, and 2023 Lincoln Aviator vehicles equipped with automatic transmissions. The transmission may contain a loose bolt which could prevent the transmission from engaging the park gear, although the gear shifter position may indicate that the vehicle has been shifted to "PARK."
Consequence: The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury.
Remedy: Dealers will inspect and, if necessary, replace the transmissions, free of charge. Owner notification letters were mailed April 25, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S06.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124715005230749000000180
Manufacturer-Supplied Component Name: 10 Speed Automatic Transmission Assembly
Manufacturer-Supplied Component Description: Automatic Transmission Assembly
Manufacturer-Supplied Component Part Number: L1MP-7000-YA
Do Not Drive: No
Park Outside: No
POWER TRAIN: AUTOMATIC TRANSMISSION

Running Sequence Number: 243051
Campaign Number: 23V070000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S06
Component Name: POWER TRAIN: AUTOMATIC TRANSMISSION
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1138
Date Owner Notified: Apr 25, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Feb 10, 2023
Record Creation Date: Feb 10, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 F-150, Mustang, Explorer, Bronco, and 2023 Lincoln Aviator vehicles equipped with automatic transmissions. The transmission may contain a loose bolt which could prevent the transmission from engaging the park gear, although the gear shifter position may indicate that the vehicle has been shifted to "PARK."
Consequence: The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury.
Remedy: Dealers will inspect and, if necessary, replace the transmissions, free of charge. Owner notification letters were mailed April 25, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S06.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124715005230749000000180
Manufacturer-Supplied Component Name: 10 Speed Automatic Transmission Assembly
Manufacturer-Supplied Component Description: Automatic Transmission Assembly
Manufacturer-Supplied Component Part Number: L1MP-7000-VB
Do Not Drive: No
Park Outside: No
POWER TRAIN: AUTOMATIC TRANSMISSION

Running Sequence Number: 243052
Campaign Number: 23V070000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S06
Component Name: POWER TRAIN: AUTOMATIC TRANSMISSION
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1138
Date Owner Notified: Apr 25, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Feb 10, 2023
Record Creation Date: Feb 10, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 F-150, Mustang, Explorer, Bronco, and 2023 Lincoln Aviator vehicles equipped with automatic transmissions. The transmission may contain a loose bolt which could prevent the transmission from engaging the park gear, although the gear shifter position may indicate that the vehicle has been shifted to "PARK."
Consequence: The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury.
Remedy: Dealers will inspect and, if necessary, replace the transmissions, free of charge. Owner notification letters were mailed April 25, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S06.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124715005230749000000180
Manufacturer-Supplied Component Name: 10 Speed Automatic Transmission Assembly
Manufacturer-Supplied Component Description: Automatic Transmission Assembly
Manufacturer-Supplied Component Part Number: L1MP-7000-TB
Do Not Drive: No
Park Outside: No
POWER TRAIN: AUTOMATIC TRANSMISSION

Running Sequence Number: 243053
Campaign Number: 23V070000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S06
Component Name: POWER TRAIN: AUTOMATIC TRANSMISSION
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1138
Date Owner Notified: Apr 25, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Feb 10, 2023
Record Creation Date: Feb 10, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 F-150, Mustang, Explorer, Bronco, and 2023 Lincoln Aviator vehicles equipped with automatic transmissions. The transmission may contain a loose bolt which could prevent the transmission from engaging the park gear, although the gear shifter position may indicate that the vehicle has been shifted to "PARK."
Consequence: The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury.
Remedy: Dealers will inspect and, if necessary, replace the transmissions, free of charge. Owner notification letters were mailed April 25, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S06.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124715005230749000000180
Manufacturer-Supplied Component Name: 10 Speed Automatic Transmission Assembly
Manufacturer-Supplied Component Description: Automatic Transmission Assembly
Manufacturer-Supplied Component Part Number: L1MP-7000-SB
Do Not Drive: No
Park Outside: No
POWER TRAIN: AUTOMATIC TRANSMISSION

Running Sequence Number: 243054
Campaign Number: 23V070000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 23S06
Component Name: POWER TRAIN: AUTOMATIC TRANSMISSION
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1138
Date Owner Notified: Apr 25, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Feb 10, 2023
Record Creation Date: Feb 10, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2022-2023 F-150, Mustang, Explorer, Bronco, and 2023 Lincoln Aviator vehicles equipped with automatic transmissions. The transmission may contain a loose bolt which could prevent the transmission from engaging the park gear, although the gear shifter position may indicate that the vehicle has been shifted to "PARK."
Consequence: The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury.
Remedy: Dealers will inspect and, if necessary, replace the transmissions, free of charge. Owner notification letters were mailed April 25, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S06.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124715005230749000000180
Manufacturer-Supplied Component Name: 10 Speed Automatic Transmission Assembly
Manufacturer-Supplied Component Description: Automatic Transmission Assembly
Manufacturer-Supplied Component Part Number: L1MP-7000-FD
Do Not Drive: No
Park Outside: No
AIR BAGS: SENSOR: SIDE IMPACT

Running Sequence Number: 227584
Campaign Number: 22V928000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22S77
Component Name: AIR BAGS: SENSOR: SIDE IMPACT
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1226
Date Owner Notified: Jan 20, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 14, 2022
Record Creation Date: Dec 15, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles. The right or left side impact sensors may not be properly secured to the vehicle.
Consequence: An improperly secured side impact sensor may cause the air bags to unintentionally deploy, or not to deploy as intended, increasing the risk of injury in a crash.
Remedy: Dealers will inspect the side impact sensor attachments and repair, as necessary, free of charge. Owner notification letters were mailed January 20, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S77.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124388005230749000001834
Manufacturer-Supplied Component Name: REINF_ASY_CTR_BDY_PLR
Manufacturer-Supplied Component Description: B-pillar inner ? LH / 4-Door
Manufacturer-Supplied Component Part Number: M2DB-S24383-AH
Do Not Drive: No
Park Outside: No
AIR BAGS: SENSOR: SIDE IMPACT

Running Sequence Number: 227582
Campaign Number: 22V928000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22S77
Component Name: AIR BAGS: SENSOR: SIDE IMPACT
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1226
Date Owner Notified: Jan 20, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Dec 14, 2022
Record Creation Date: Dec 15, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles. The right or left side impact sensors may not be properly secured to the vehicle.
Consequence: An improperly secured side impact sensor may cause the air bags to unintentionally deploy, or not to deploy as intended, increasing the risk of injury in a crash.
Remedy: Dealers will inspect the side impact sensor attachments and repair, as necessary, free of charge. Owner notification letters were mailed January 20, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S77.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124388005230749000001834
Manufacturer-Supplied Component Name: REINF_ASY_CTR_BDY_PLR
Manufacturer-Supplied Component Description: B-pillar inner ? RH / 4-Door
Manufacturer-Supplied Component Part Number: M2DB-S24382-AH
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 208253
Campaign Number: 22V825000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C27
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 47046
Date Owner Notified: Dec 23, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Nov 3, 2022
Record Creation Date: Nov 4, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with rearview camera systems and 8-inch screen displays. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 25, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C27.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124209005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-LP
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 208254
Campaign Number: 22V825000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C27
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 47046
Date Owner Notified: Dec 23, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Nov 3, 2022
Record Creation Date: Nov 4, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with rearview camera systems and 8-inch screen displays. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 25, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C27.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124209005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-LH
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 208255
Campaign Number: 22V825000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C27
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 47046
Date Owner Notified: Dec 23, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Nov 3, 2022
Record Creation Date: Nov 4, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with rearview camera systems and 8-inch screen displays. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 25, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C27.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124209005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-LD
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 208252
Campaign Number: 22V825000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C27
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 47046
Date Owner Notified: Dec 23, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Nov 3, 2022
Record Creation Date: Nov 4, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with rearview camera systems and 8-inch screen displays. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 25, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C27.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124209005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MD
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 208251
Campaign Number: 22V825000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C27
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 47046
Date Owner Notified: Dec 23, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Nov 3, 2022
Record Creation Date: Nov 4, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with rearview camera systems and 8-inch screen displays. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 25, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C27.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124209005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MH
Do Not Drive: No
Park Outside: No
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Running Sequence Number: 208250
Campaign Number: 22V825000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C27
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 47046
Date Owner Notified: Dec 23, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Nov 3, 2022
Record Creation Date: Nov 4, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with rearview camera systems and 8-inch screen displays. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.
Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 25, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C27.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000124209005230749000001568
Manufacturer-Supplied Component Name: SYNC Software
Manufacturer-Supplied Component Description: 2021-2022 Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G682-MP
Do Not Drive: No
Park Outside: No
VISIBILITY: WINDSHIELD

Running Sequence Number: 206532
Campaign Number: 22V451000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C12
Component Name: VISIBILITY: WINDSHIELD
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 63294
Date Owner Notified: Jul 18, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jun 24, 2022
Record Creation Date: Jun 24, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 212
Summary: Ford Motor Company (Ford) is recalling certain 2022 Bronco and Ranger vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed July 18, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C12.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000121748005230749000000236
Manufacturer-Supplied Component Name: Windshield
Manufacturer-Supplied Component Description: Ranger Windshield
Manufacturer-Supplied Component Part Number: KB3B-2103100-*
Do Not Drive: No
Park Outside: No
VISIBILITY: WINDSHIELD

Running Sequence Number: 206535
Campaign Number: 22V451000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C12
Component Name: VISIBILITY: WINDSHIELD
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 63294
Date Owner Notified: Jul 18, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jun 24, 2022
Record Creation Date: Jun 24, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 212
Summary: Ford Motor Company (Ford) is recalling certain 2022 Bronco and Ranger vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed July 18, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C12.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000121748005230749000000236
Manufacturer-Supplied Component Name: Primer
Manufacturer-Supplied Component Description: Betaprime 5504G primer
Manufacturer-Supplied Component Part Number: WSS-M5B280-C4
Do Not Drive: No
Park Outside: No
VISIBILITY: WINDSHIELD

Running Sequence Number: 206534
Campaign Number: 22V451000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C12
Component Name: VISIBILITY: WINDSHIELD
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 63294
Date Owner Notified: Jul 18, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jun 24, 2022
Record Creation Date: Jun 24, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 212
Summary: Ford Motor Company (Ford) is recalling certain 2022 Bronco and Ranger vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed July 18, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C12.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000121748005230749000000236
Manufacturer-Supplied Component Name: Urethane
Manufacturer-Supplied Component Description: Bonding between windshield and body structure
Manufacturer-Supplied Component Part Number: WSS-M2G316-B4
Do Not Drive: No
Park Outside: No
VISIBILITY: WINDSHIELD

Running Sequence Number: 206533
Campaign Number: 22V451000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22C12
Component Name: VISIBILITY: WINDSHIELD
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 63294
Date Owner Notified: Jul 18, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jun 24, 2022
Record Creation Date: Jun 24, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 212
Summary: Ford Motor Company (Ford) is recalling certain 2022 Bronco and Ranger vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."
Consequence: A windshield that separates from a vehicle during a crash can increase the risk of injury.
Remedy: Dealers will remove and reinstall the windshield, free of charge. Owner notification letters were mailed July 18, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C12.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000121748005230749000000236
Manufacturer-Supplied Component Name: Windshield
Manufacturer-Supplied Component Description: Bronco Windshield
Manufacturer-Supplied Component Part Number: N2DB-S03100-*
Do Not Drive: No
Park Outside: No
LATCHES/LOCKS/LINKAGES: DOORS: LOCK

Running Sequence Number: 220810
Campaign Number: 22V411000
Make: FORD
Model: BRONCO
Year: 2022
MFR Campaingn Number: 22S44
Component Name: LATCHES/LOCKS/LINKAGES: DOORS: LOCK
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 53103
Date Owner Notified: Jun 28, 2022
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Jun 10, 2022
Record Creation Date: Jun 10, 2022
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain four-door 2021-2022 Bronco vehicles. The passenger-side rear door may be opened from inside of the vehicle when the child safety lock is in the "ON" position.
Consequence: A malfunctioning child safety lock increases the risk of injury to a child occupant.
Remedy: Dealers will inspect the passenger-side child safety locks door child safety lock and latch, and replace them, if necessary, free of charge. Owner notification letters were mailed June 28, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S44.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000121228005230749000002058
Manufacturer-Supplied Component Name: DR ASY RR
Manufacturer-Supplied Component Description: Right Rear Sheet Metal Door
Manufacturer-Supplied Component Part Number: M2DB-S24630-BG
Do Not Drive: No
Park Outside: No

Search New Vehicle

Make

Model

Year

2022 FORD BRONCO Recalls

2022 FORD BRONCO Recalls

Protect Your Family and Yourself!

BACK OVER PREVENTION: SOFTWARE

BACK OVER PREVENTION: SOFTWARE

BACK OVER PREVENTION: SOFTWARE

BACK OVER PREVENTION: SOFTWARE

BACK OVER PREVENTION: SOFTWARE

BACK OVER PREVENTION: SOFTWARE

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

SEATS: CRITICAL FASTENERS

EQUIPMENT: ELECTRICAL: ENGINE BLOCK HEATER

EQUIPMENT: ELECTRICAL: ENGINE BLOCK HEATER

FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

BACK OVER PREVENTION: SOFTWARE

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SOFTWARE

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

SUSPENSION: REAR: SHOCK ABSORBER

SUSPENSION: REAR: SHOCK ABSORBER

SUSPENSION: REAR: SHOCK ABSORBER

SUSPENSION: REAR: SHOCK ABSORBER

SUSPENSION: REAR: SHOCK ABSORBER

SUSPENSION: REAR: SHOCK ABSORBER

SUSPENSION: REAR: SHOCK ABSORBER

ENGINE AND ENGINE COOLING: ENGINE: HARD PARTS INTERNAL/MECHANICAL

EQUIPMENT: OTHER: LABELS

SEAT BELTS: CRITICAL FASTENERS

SEAT BELTS: CRITICAL FASTENERS

SEAT BELTS: CRITICAL FASTENERS

SEAT BELTS: CRITICAL FASTENERS

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

STEERING

STEERING

POWER TRAIN: AUTOMATIC TRANSMISSION

POWER TRAIN: AUTOMATIC TRANSMISSION

POWER TRAIN: AUTOMATIC TRANSMISSION

POWER TRAIN: AUTOMATIC TRANSMISSION

POWER TRAIN: AUTOMATIC TRANSMISSION

POWER TRAIN: AUTOMATIC TRANSMISSION

POWER TRAIN: AUTOMATIC TRANSMISSION

AIR BAGS: SENSOR: SIDE IMPACT

AIR BAGS: SENSOR: SIDE IMPACT

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

VISIBILITY: WINDSHIELD

VISIBILITY: WINDSHIELD

VISIBILITY: WINDSHIELD

VISIBILITY: WINDSHIELD