Hey guys- searched but didn't answer specifics;

I have an 06 2wd XL with tow package and 4.6. I'm towing a 6x12 utility trailer with a total around 2300lbs of equipment. Currently when loaded the truck is pretty level and tows well.

My question is:
I have a set of 2 1/2" front leveling spacers laying around and am wondering if the truck will look squated in the rear with these on.... Not planning on doing a weight distribution hitch if not necessary..... I can adjust somewhat how equipment is loaded to adjust tounge weight also

thanks for any suggestions or input!

 

Obviously if your truck is level when loaded...if you raise the front end, then the back end will be squatting by that 2.5".

Keep in mind also if you install those leveleing spacers in the front end..the front end is now higher and it will need to be aligned to get your truck driving again without wearing tires. All major alignment angles, camber, caster and toe should all be out of spec after installation.

 

Yes it will squat in the rear while towing. Also messing with a good tongue weight is not a good idea. Tongue weigt should be 8 to 15% of towed weight. Too low or too high can wreck. I have seen it before. Trailer starts to sway. In other words the tail wags the dog.

 

Dang double post.

 

Thanks for the advice guys- guess I'll be auctioning off an un-used leveling kit in the near future!