2” RC leveling kit is less than 1.5” thick?
 

I received my kit today and noticed that they didn’t look very thick so I measured them. I assume there is something that I don’t understand as I thought they would be 2 inches thick? Any input would be most appreciated. Thanks guys

2 Inch Leveling Kit | Loaded Strut | Ford F-150 4WD (2014-2022) | Rough Country

I assume you got the above? It is all done in the spring/strut assembly. Don't forget to do an alignment. You may need camber adjusters.
I lowered my '15 back to stock with a set of their "stock" replacements and the truck drove really nice. Can't wait to do this to a '14. Keep us posted!

Hey, no I got this one https://www.roughcountry.com/ford-le...150-2wd-740530 and these blocks are the ones that are not even 1.5". I plan to contact them today and ask what I am missing.


UPDATE: their answer - "Physical measurements is not how suspension works. What the spacers does to the geometry is where the lift comes from". Sounds reasonable to me; I know nothing about this stuff.