I just recently installed a pair of Camburg UCA and noticed there are grease fittings on them. Can anyone recommend what type of grease should be used here? Thanks in advance

 

Parts stores should have tubes of Mobil 1 synthetic grease, that's what I recommend.

https://mobiloil.com/en/synthetic-gr...nthetic-grease

 

THanks for the rec! I'm assuming I just need to pump enough grease in there until it oozes out the seams?

 

That Mobil 1 is good. I have used it with positive results on heavy equipment.

I also have had good results with Mystik No2 JT6 grease as well.

Yes, you pump it till you get fresh grease coming out the boot. Clean it with a rag, and you are all set.

MAKE SURE you clean the zerk BEFORE attaching the grease gun to it... if there is dirt, you risk clogging the zerk.