Truck is 2008 f150 scab 4x4 5.4L. New pads and rotors, tie rod ends last week. Nitto Crossteks on 20" XD Monsters with less than 4k on them, didn't have issues previously, have not thrown weight, rotated 800 miles ago. New 2 months ago Rancho quicklift and rear RS9000 shocks.

I have a vibration/ shudder when braking and also Around 30 mph and above 70. Newer Moog UCAs and ball joints upper and lower check out fine.

As stated, rotors are new. Had this vibration before I swapped them, the old ones were slotted rotors. New ones properly bedded. Could I be looking at bad motor mounts with this problem? Don't think it's wheel bearings, there is no play in wheels side to side or up and down and no strange sounds of any kind. Thoughts? Thanks folks.