6inch 37's????
 

Hey I just bought a 2005 F150 King Ranch and was thinking about getting a 6inch lift and hopefully running 37's.
Any suggestions?

If you are starting out wanting 37's, I'd suggest the 8 inch Rize lift.

Ive heard you can do it though with 6inches... and im looking for more of the crammed look

It will be crammed and trimmed with only 6" of lift on most kits. Most who have added 6" and 37's end up running coilovers or a leveling kit in addition to get 8" of lift. I would also say that most who go larger end up wanting to go even bigger eventually. :D

I agree with Wandell, the 8" rize is a solid lift for your truck.

Imo just get a 8" rize with some 38's, later on if you want to add a couple more inches you could always get the bilsteins or a leveling it and it would still look good with 38's. If that makes any sence.

i agree start out with the 8inch rize and some 38s that will look good.... Now if you go with a 6inch then you will prob wnt a leveling kit to run 37s...... Also running 37s+ your gonna need to re gear as well front and rear

id go with a rize as well, like everyone else is suggestin

I wish I went with the rize... A 6 inch lift will require coilovers or a spacer to run 37s.

dont forget you might want to regear with some 4.56s as well!!

dude you can run 37's with a 6 inch and it will look great. Truckin' magazine just did a 6" and 37" combo on a 2009 2wd f150. i go for the crammed look everytime i lift too. im running a 2.5 coil spacer and 35's right now... 37's can definitely be done with 6 inches. but if you want to be really big an 8" rize and ATLEAST 38's will be a good crammed look. but we all know that rize is not exactly cheap. a good 6" can run you less than half of what a rize will. so its all in what you want. big or really big