lifted torsion bars?
 

i have an 01 supercrew 4x4 with a rancho 4" lift. Is it possible to do a t bar crank to get the front up a little more, id like the front up about an inch more.

Yes, depending on how much preload the installer put on the torsion bars during installation. I would think another inch would not be a problem.

do you know of a link or a write up on how to do it or is it easyier

1. Jack the front end off the ground
2. place jackstands
3. spray some PB Blaster on the adjustment bolts
4. Mark the head of the bolt so you can accurately count the number of turns
5. Make as many turns as you want or max them out then back out 1/2 a turn
6. drop the truck down
7. check ride heigth, see if you like it. If not jack it back up and try again.
8. When you are happy, go get the truck aligned.

Pretty simple