6" Fabtech with..
I have a 6" Fabtech on my F150 right now.. Looking to go up a little more.
I want to throw an AAL on the rear... If i go with a 1 1/2" AAL from AS should i go with a 2" or 2 1/2" front AS Spacer to keep the look where it's at now. I don't want the front and rear to be different heights... Looking to purchase ASAP.. Any suggestions guys? Thanks |
if you do a 1 1/2" AAl now, 2" in the front will have you sitting nose high and ass low. do a 2" AAL if you want to keep the front and rear level. the AAL will sit higher than 1 1/2" for a week or so after install until it sets in.
|
Originally Posted by 06yz250f
(Post 3356759)
if you do a 1 1/2" AAl now, 2" in the front will have you sitting nose high and ass low. do a 2" AAL if you want to keep the front and rear level. the AAL will sit higher than 1 1/2" for a week or so after install until it sets in.
Alright so run a 2" Front AS Spacer and a 2" Rear AAL to keep it level... Thanks! Now i just gotta find the parts.. Was going to get the spacers from SprngBender and ideas for the AAL Thank you 06yz250f |
im running bds aal. there only about an inch or inch and a half total tho. but just a warning if you do sit a hair high in the front which is a possibility you can use shims on the rear. someone else will have to tell you more about that.
for front most people run autospring spacers. i think sky jacker has some as well and they also have aal i believe. just look around for the best price available and for a well known manufacturer. what size tires are you planning on running? |
All times are GMT -4. The time now is 10:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands