what should i do to get more lift
 

im runing a 6" pro comp lift with 35" M/T mtz i wana body lift it 2 or 3 inches so the side biters stop wreking my inner fenders when im turning but i have heard of guys doing another 2" spacer on top of what they already have? how hard is this to do and what els do you need to change to make it work have any of you done this?

I would not stack a leveling kit on top of the 6 inch Pro Comp spacer. Either upgrade to the MX6 coilovers and crank them up for another inch or two of lift or add a 3 inch Performance Accessories body lift.

with the body lift do you notice a change in how your truck feals going down the road does it feal like it sways around more or any thing? how bad are they to put in i have done 3 suspension lifts but i dnt knw crap obout body lifts?

The body Lift doesnt feel any different then driving without it. IMO my the body lift did nothing to affect ride at all. It does give you a bigger surface area pushing though the air, but i couldnt tell any difference!

i'd get a set of bilsteins up front and put them at the 2 inch setting, several guys on here did that. safer than a spacer, better looking and cheaper than a body lift.

That's another option.

ya i im going to run the bilstien 5100 set up in the front and put a biger block in the rear for now i will add the body lift later every one knows once you start moding it never stops