37''x13''
 

i have an 05 4wd, i just ordered a 6'' procomp susp. lift and a 3''body lift. will 37''x13'' tires fit? i have a 17x10 wheel w/ 4.5'' back spacing. any commets are appreciated.

they will fit. but you will need gears!!!

thanks adam, do you think 488 gears will do the job?

yes 4.88s would be the gear of choice for 37s

I agree, but I think you will be better off with a wheel with more backspacing or slightly narrower, or both.

i think the rims and tires would be fine. it would give you a "meatier" look and make the truck look mean. 4.88s will work wonderfully.

you ll be fine, you wont have to get gears by the way but the will help

thanks alot guys. i bought 37'' boggers. my lift kits will be here monday. i am installing them myself. is there any tricks that i should know about? this will be my first lift. i put air bags and body dropped my cousins truck. we did alot of modifying to it. i dont think this will be that hard. thanks again

BOGGERS!:eek:

BOGGERS!:rocker:

approx. how much are people here paying to get 4:88 gears installed?

Doing my own body lift now and it is a job.....will finally finish it on monday (it is locked in the shop until then) will have a total of about 15-16 hours in it. My only real advise is on your 2d, 2p, and 4d if you can lift the cab off the frame and make sure you have a really good 1/2" drill bit. A press also comes in handy when pressing out the 2d, 2p, and 4d bushings that are press fitted in. E-mail me if you have any questions and I will be more than happy to help you out. Most of all remember to have fun.....it will more than likely throw a few curves at you.

Eric

thanks eric, if i have problems i will e-mail you. that is why i am doing all the work myself b/c i think it is fun. and i learn alot.

LOL boggers on a 2005 f150, sweet! :banana: