need help with fabtech lift.
I am in the middle of putting my lift on. :rocker: How do i get the CV axle shaft off of the hub and steering knuckle? I have the axle and steering knuckle off of the truck. The hanes manual said to use a gear puller and try to push the axle and steering knuckle apart. That didnt work whatsoever. Anyone that has any experience with this any help would be appreciated. I have a 2000 F-150 4x4. Thanks for the help.
Here are some pics of the CV axle and steering knuckle http://i113.photobucket.com/albums/n...jermal/032.jpg I tried to put the arms of the puller on the edge of the hub and have the screw push the axle out of it but that didnt work. http://i113.photobucket.com/albums/n...jermal/033.jpg |
|
http://i113.photobucket.com/albums/n...jermal/030.jpg
http://i113.photobucket.com/albums/n...jermal/031.jpg Here are the tires goin on it. http://i113.photobucket.com/albums/n...jermal/005.jpg :rocker: |
I know on the 04+ you have to take the 3 bolts off the backside of the steering knuckle and it just comes out. I see you still have them in????
|
on the 2000 you dont have to take them off.They just hold te hub on and the axle slides through it.
|
Finally got the front cross member on today. It took 3 hours of grinding on the brackets to get it to fit. If i didnt grind down on the bracket where it attaches to the frame it wasnt gonna fit.
http://i113.photobucket.com/albums/n...jermal/004.jpg |
All times are GMT -4. The time now is 12:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands