Hello, its been a while since I've been on here. I need to rebuild my Procharger and anticipate it being off for a little while and would still like to have use of my truck. Do you guys think its possible to put a bypass tube piece in place of the SC and return the truck to stock tune and still be functional?

 

I would talk to whoever is doing rebuild. Get estimate on down time. See if expedited service is available and consider renting a cheap car. Long run could be easier and cheaper ln the long run rather than risk messing something up

 

I have run mine without a belt for quite a while with no ill effects. BUT, mine was tuned for the blower and 42 lbs injectors. No boost a pump.

 

Mine is tuned for the system as well with larger injectors. I think I will try it but maybe have my laptop hooked up to see what going on while its off. I was't sure if someone had done this already, so I thought I would ask. Thats a lot of tubing for the engine to naturally breath through
Thanks

 

you're on stock injectors and MaF?

 

No, 29lb injectors and 80mm maf

 

You can't do it. It won't run right and probably run rich. You'll burn up your cats and cause a host of other problems... Previous recommendation to rent a car was a good choice. Or you public transit