I'm thinking of removing all my HT0 plugs and re-gapping them tighter.

I never put one ounce of thought to gapping the HT0 plugs before I installed them. Now, I'm kinda of regretting it.

I got My HT0 plugs off Ebay for $75

 

The hardest part was getting the exhaust manifold bolts and studs out. You also have to remove the cross member and the starter just to gain access. Having said all that, they sound awesome!!!!!!!!!!!!!

 

Is there any way that you can get a copy of the instructions to me? I have a toll free if you can fax them. I'd like to take a look before I take the plunge

 

The recieved fax is usually in a tif format which is digital. If you can could you send those tif files to the email address I will PM you with?

 

hey does the whipple use the stock throttle body and would larger after market one fit on it?

 

this is somewhat of a different subject, but kinda the same... i have an 05 with almost 100k on the motor, but want to do something like add a whipple. it the milage and wear going to cause a problem?

 

this is actually for WSTAFFORD. I've been installing the whipple and i'm stuck at part of the brake booster. I have the 04 fx4 and i only see the 1 line comming out of the master brake cylinder and not that tee that whipple is showing in the manual...also where is the line that whipple is showing thats running on top of the firewall..... the insrtuctions are good but they were deffinitly better when i got them printed out in color.... for the price whipple should send out a video..... please feel free to email me fox540@aol.com do happen to have a pic of the brake booster setup that you did just so i don't screw something up..... thanks agian

 

Email on the way!

 

Boy, do I need to have a look at those Whipple instructions. What in the world does the brake booster have to do with an SC install?

 

I am helping Johnny Bravo with his supercharger and we are lost regarding the PCV hose and fitting on the driver side valve cover. We took off the old hose like the directions said but then it never says to hook anything back up to the driver side head barb nipple. Are we supposed to hook something up to that again and we also have a spare hose that we have not used. Please help if anyone can.

 

Mean if you haven't seen the instructions you are in for a treat....that was almost one of the most confusing things that brake booster.

 

Elaborate..

 

I am currently searching for a copy of the 2005 Whipple install guide and parts list. I can't find anything online, can someone help me out?
THANKS!

jordonstandeven@hotmail.com

 

I am also looking to see if I can get a copy of the instructions for my 2005 F150. Thanks Tom

 

I got a manual from Whipple themselves....
https://drive.google.com/file/d/1byx...ew?usp=sharing

And, the parts list too.
https://drive.google.com/file/d/1nb0...ew?usp=sharing