Crappy weather today. Been out looking at the new shoes. I just called the tire joint because I want a little wider tire. so they just ordered 295/40/20's for me with no grief. I've rolled an entire 1 mile on these and the side walls have been bugging me. I like a blocked side wall with no stretch. Hard earned money means get exactly what you want and don't settle. The pics show the width issue I'm having. The tread is not as wide as the rim.
https://www.f150online.com/forums/me...-imag08411.jpghttps://www.f150online.com/forums/me...-imag08421.jpg

They were as wide as the last ones on a 10" rim too, weren't they? Less sidewall though, so that's probably why.

The lightning rims have 295/45/18's Going to a 295/40/20 will put me back where I was on width.

Oh, thought they both had 275s.

Got the even newer shoes today. 295/40/20 Toyo Proxie ST II's. Looks a crap load better.
Had the alignment checked to be sure and it is dialed in. All in all a good day!

[IMG]https://www.f150online.com/forums/me...-imag08491.jpg[/IMG]https://www.f150online.com/forums/me...-imag08521.jpghttps://www.f150online.com/forums/me...-imag08511.jpghttps://www.f150online.com/forums/me...-imag08501.jpg

Does indeed look better!

Thanks Kent

Got a couple of pics today. People have asked what the new tires look like from
the back. Just happened to catch a bit of the pearl in one of them. Still waiting of the custom seat covers. Shouldn't be to much longer... getting anxious.

https://www.f150online.com/forums/me...-imag08701.jpghttps://www.f150online.com/forums/me...-imag08761.jpg

I'm in the process of another audio revamp. I didn't like the way the current one was sounding. I have picky ears and have done competitions in the past. I just received my new amps and bass knob. I went back to my original set up from back in the day with just newer versions. Rockford Fosgate P1000x1bd on the lows and a Rockford Fosgate P600x4 to handle mids and highs.
Both birth sheets are impressive and am looking forward to hearing these things get down. I may be replacing subs so the Ohms works with the amp better. I will decide once I hear these with the new amps. Keep in mind the numbers at the bottum right of the birth sheets is the rated RMS power, not max.

https://www.f150online.com/forums/me...-p1000x1bd.jpg https://www.f150online.com/forums/me...irth-sheet.jpghttps://www.f150online.com/forums/me...ate-p600x4.jpghttps://www.f150online.com/forums/me...irth-sheet.jpghttps://www.f150online.com/forums/me...-bass-knob.jpg

What does the rear seat look like in the truck since its out of a Expy?

This pic is while working on the install. I need to get more pics when in gets back from the paint shop detail.https://www.f150online.com/forums/me...-imag05931.jpg

That is cool, any special brackets or anything?

Balls and fender washers..lol Shallow uni-strut and some earthquake support brackets from work to configure the front part.
Painted everything flat black for O.E. appearence.

Cleaned up the wheel wells, repainted everything and reworked the spindles and made custom dust caps to shorten things up so the
wheel center caps would fit.

https://www.f150online.com/forums/me...-imag08961.jpghttps://www.f150online.com/forums/me...-imag08921.jpg

20x10s right?