Hey guys, been a while since ive posted, but thought i share a build im doing for a fellow member (7lug)

Started on it today, only was able get a little done. The specs are shooting for 1.25-1.3 net per sub and tuning to 31 hz. The subs of choice are the new 10" Skar Audio 10's. should be a nice little setup! These will seat under the seat in a 2004 Supercab with a LMI seat lift.

Subs, well one of them atleast


Wood Lol


And the little start i got, much more progress to show tomorrow!

 

Man I'm SUPER excited! Finally a substage that is more than the SCS stuff that's in 90% of our trucks. Guys, Weazel is a total guru and knows his s**t If you have any questions about this build from my end like gear etc just let me know! I'll try and answer everything I can

 

Seat lift and you went with 10s?? Or are you porting them?

 

His enclosure will be tuned to 31hz per his request.

 

Well im trying to upload more pics but PB is being gay!

 

Nice, a pair of ported 10s should be nice.

How well are the Skars built? They sorta look like IDMax knockoffs...

 

Build wise the seem very nice, pretty nice on the lows too

 

Ok here we go, finally PB was nice!

 

mSall150!!! Whats up man... I was wondering how long it'd be before you got in here lol... As far as ported, come on dawg... Its ME! Ported for SQ baby!!! hahaa

 

Could be interesting.... Im following this.

 

Can't wait to see this done. Getting ready to build a seat lift for mine. And then a new enclosure. Very curious on how this will sound.

 

With an EQ and some cut around 40hz, it will have very good SQ!

 

Huh...cut at 40hz? Actually throughout the entire frequency range, an EQ will probably have the least affect on the substage

 

Depends on the EQ and the number of bands, but I have an RF 3Sixty.2 and it made a nice difference in my sub setup. Yours will still be nice w/o any adjustment tho

 

No you're right, an EQ can (and in your case does) have a good effect on subs. I will be running the Pioneer DSP, but more for time alignment and overall tunability

But I was kinda confused about the "cut at 40hz".. what did you mean?