When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey again y'all, my hyper-flash is gone on account of the LED compatible flasher, but shortly after I installed the LED's for the turn signals, my cruise control stopped working...at all.
Yup, make sure you didn't install LEDs in the taillights/CHMSTL. Some LEDs don't have the correct resistance, so the cruise control thinks you're applying the brakes because it shows a low resistance similar to a closed circuit.
Last edited by SoonerTruck; 06-19-2019 at 02:37 PM.
Hey Sooner, that worked!
Funny thing is, I changed out front and rear turn signals for LED's, but I only changed back the rears.
Now my cruise control works again, thanks for the suggestion.